How Is Siding Installed?

Here’s a simplified breakdown of how we complete a siding job: We begin by taking off the existing siding and checking the exposed wall for any hidden damage. A weather-resistant barrier is then added to protect your home and help extend the life of the new siding. Next, we install starter strips and corner posts for materials like vinyl, fibre cement, or engineered wood. This forms a reliable base for everything that follows. Each siding board is installed with accuracy and secured using nails or screws to ensure it stays in place. To wrap up, we add flashing and trim to protect edges and give your home a clean, polished finish.

When Should You Replace Your Siding?

Old siding can lead to bigger issues if left unchecked. Watch for signs like cracks, warping, or visible seams separating. These allow water to get in and reduce your siding’s ability to protect your home. Faded panels or peeling paint also suggest it may be time for an upgrade. If your heating or cooling bills have jumped, the problem may be poor insulation behind the siding. Loose or missing panels can point to deeper structural issues. Spotting these signs early helps you avoid costly repairs. Think your siding might be due for a replacement? Contact us for a free quote.

Should You Repair or Replace Your Siding?

It depends on how much damage you’re dealing with. Minor issues, such as light fading or a few small cracks, can usually be repaired. But if you’re seeing widespread rot, water damage, or warped areas, a full replacement is likely the better choice. You may want to replace your siding if: Energy bills are consistently rising You notice moisture inside your walls Your siding is more than 20 years old You’re constantly spending money on repairs In many cases, replacing worn siding saves money over time. Reach out and we’ll help you weigh the best option for your property.

Is Vertical or Horizontal Siding Better?

In Canmore, horizontal siding is the more common option. It installs faster, costs less, and comes in a wide range of materials and finishes. Whether your home is modern or traditional, this format works with most design styles. Vertical siding has a sleek, contemporary appearance and can make a home feel taller. It takes a bit more time and budget to install but delivers strong visual impact. Your ideal choice depends on your goals and budget. Contact us to explore both styles with a free consultation.

How Much Is Vinyl Siding Per Square Foot?

For a 1,500 square foot home in Canmore, vinyl siding starts around $7.50 per square foot. A complete installation generally ranges from $11,250 to $15,725, depending on materials and prep time. Additional cost factors include: Detail work around windows and corners The shape and design of your home Removal of old siding Extra insulation layers Simpler projects tend to be more cost-friendly. Complex layouts or material upgrades can raise the total.

What Is the Best Siding for Canadian Winters?

In Canmore, exterior siding must withstand moisture, wind, and freezing temperatures. Top-performing options for cold weather include: James Hardie fibre cement: Durable, fire-resistant, and holds colour Engineered wood: Looks like real wood and offers added durability Metal siding: Aluminum or steel holds up well in snow and ice Vinyl siding: Performs well in cold and offers solid value The right choice depends on your preferred style, budget, and maintenance preferences.

What Is the Most Cost-Effective Exterior Siding?

Getting the most value means considering both initial cost and long-term performance. Vinyl siding is the most budget-conscious at $7.50 per square foot. It requires little upkeep and handles cold well. Fibre cement and engineered wood cost more upfront but last longer with fewer repairs. Metal siding offers high durability and low maintenance but comes with a higher starting price. Your best option depends on whether you’re focused on saving now or reducing future upkeep.

What Is the Best Siding for Alberta Homes?

Homes in Alberta face snow, wind, sub-zero temperatures, and wide weather shifts. The best exterior siding materials for this region include: James Hardie fibre cement Engineered wood Metal siding (steel or aluminum) Vinyl siding Each option balances protection, style, and durability. The right choice depends on your maintenance tolerance, design goals, and budget.

How Much Is 1,000 Square Feet of Siding?

Here’s a general cost breakdown based on common materials: Vinyl Siding: $7,500 Cedar Siding: $13,500 Engineered Wood Siding: $20,500 Metal Siding: $15,000 Aluminum Siding: $30,000 Final pricing depends on material selection, prep work, insulation needs, and labour. Reach out to Family Siding for a detailed, no-cost quote tailored to your home.

Exterior House Siding Contractors in Canmore

Guaranteed Quote Within 24 Hours & Free, On-Site Consultation
Flexible Financing + Limited-Time Promotions
We Beat Competitor Quotes by 5% - Transparent Pricing

Online Quote

https://familysiding.com/wp-content/uploads/2025/03/i-underroof.com-main-page-Frame-384-2.jpg

A Message from Bryan, Owner of Family Siding

Brian Davis

CEO of Family Siding

Hi, I’m Bryan. With over 30 years working in Canmore’s siding trade, one thing has always been clear: no two properties are the same. At Family Siding, we install long-lasting siding in Canmore that fits your space and your needs.

Quality Installation from Start to Finish

Our crews follow manufacturer instructions step by step. No cutting corners. No guesswork. Just clean, reliable craftsmanship when installing siding in Canmore.

We Handle Everything from Day One

From your first inquiry to the final walkthrough, our team stays with you. No confusion. No handoffs. Just clear, steady service throughout.

Built to Withstand Canmore’s Climate

Canmore sees harsh winters, sudden temperature shifts, and high winds. We use siding materials that stay strong through it all.

Year-Round Protection for Your Home or Business

Our siding is selected for Canmore’s changing conditions. Contact us today and let’s get your project moving.

About Us

Brian Davis

CEO of Family Siding

Our Siding Services in Canmore

1. James Hardie Siding

Canmore’s changing weather can wear down exteriors fast. James Hardie siding stands up to it. Built from fiber cement, it resists moisture, bugs, and temperature shifts. Unlike wood or vinyl, it won’t crack, warp, or swell when conditions fluctuate.

Hardie siding also improves your home’s appearance. With a wide variety of textures and colours, it delivers a clean, long-lasting finish. The added insulation helps balance indoor temps and reduces outside noise.

At Family Siding, we install it the right way, so you get the full benefit. Choose the best siding for Canmore and request your free quote today.

2. Vinyl Siding

Canmore weather doesn’t hold back. Vinyl siding is built for it. It holds up against wind, cold, and heat with very little upkeep. A quick wash is all it needs to keep it looking sharp.

With plenty of colour and style options, vinyl makes for a quick exterior upgrade. It also adds insulation value and helps manage energy use across all seasons.

The Family Siding team installs vinyl with care for long-term performance. Reach out today for a no-cost estimate.

3. Cedar Siding

Looking for natural warmth with strength? Cedar siding is a smart pick. It handles moisture, stands up to seasonal changes, and resists mildew and insects without harsh chemicals.

Bevel siding channels water away, while channel-style panels give your exterior extra depth. Both help regulate interior comfort during Canmore’s weather swings.

We install cedar siding with close attention to quality and finish. Contact us today to book your free quote.

4. Metal Siding

Canmore’s climate can be unpredictable. Metal siding is built to stay solid. It resists cracking, bending, and warping through snow, wind, and freeze-thaw cycles.

Steel siding keeps out water, protects against fire, and absorbs impact. It also offers clean lines and comes in a range of colours and textures.

Installed by Family Siding, metal siding offers durability, insulation, and less upkeep. Request your free estimate today.

5. Longboard Siding

Want the look of wood without the work? Longboard siding gives you that with premium-grade aluminum that resists water, UV rays, and wear throughout Canmore’s seasons.

It’s lightweight, easy to maintain, and available in both woodgrain textures and bold colours. No need for constant refinishing or repairs.

When installed by Family Siding, longboard siding adds both style and strength. Book your free quote today.

6. LUX Siding

LUX siding delivers a sleek finish that holds up through tough conditions. It won’t dent, fade, or peel, and requires very little maintenance to stay sharp.

Choose from solid tones, metallic accents, or natural wood looks. Its interlocking system improves both structure and curb appeal.

It also helps reduce heat loss in colder months. Family Siding recommends that customers install LUX siding in Canmore for both performance and style. Get your no-cost quote today.

7. EasyTrim Siding

Looking for clean lines and solid edges? EasyTrim is the answer. This aluminum trim system works with most siding types and stands strong in all weather conditions.

It seals edges tightly, resists cracking, and stays low-maintenance throughout Canmore’s climate shifts. It adds a modern architectural touch to any exterior.

Family Siding installs EasyTrim with efficiency and professionalism. Contact us now to request your free quote.

8. Engineered Siding

Engineered siding offers wood-style texture with better durability. It holds shape in cold, wet, or shifting weather and resists fading and wear.

Made from composite wood, it mimics natural grain while avoiding swelling, cracks, or moisture issues. Board and batten styles are also available for more visual depth.

Family Siding installs engineered siding that performs season after season. Request your free estimate today.

9. Aluminum Siding

Aluminum siding is a durable, lightweight choice for Canmore homes. It resists moisture, snow, and freeze-thaw cycles without fading or warping.

With baked-on colour and a variety of profiles, aluminum panels stay vibrant while keeping water out. Easy to match and maintain, it’s a smart option for any home.

Our team installs aluminum siding in Canmore with skill and attention to detail. Call now to get your free quote.

10. AL13 Siding

Built with aluminum, AL 13 siding handles Canmore’s weather without stress. It won’t crack, shift, or fade, even with rapid temperature changes.

Available in several textures and panel styles, it fits both traditional and modern exteriors. It also supports energy efficiency by helping control indoor temperatures.

Family Siding installs AL 13 with accuracy and lasting quality. Get in touch today for a no-cost estimate.

Average Cost of Siding Installation in Canmore

Siding prices in Canmore depend on the material, total square footage, site prep, and project complexity. The exact numbers depend not only on the cost of the siding contractors, but also on the type of siding. Below is a general overview of the popular types of siding used in the area. Click on any image to get full details about the prices our siding company offers.

James Hardie Siding
$12.00

James Hardie siding starts at $12.00 per square foot. For an 1,800 sq. ft. area, full project pricing runs between $21,600 and $24,790. Labour detail, trim features, and surface finish help determine the final cost.
Vinyl Siding
$7.50

Vinyl siding starts at $7.50 per square foot. For a home measuring 1,800 sq. ft., total cost usually ranges from $13,500 to $17,590. Pricing shifts based on the vinyl grade, labour hours, and prep work involved.
Cedar Siding
$13.50

Cedar siding begins at $13.50 per square foot. Covering 1,800 sq. ft. of wall space puts the overall cost between $24,300 and $27,790. The type of cedar, finish style, and installation method influence the final total.
Engineered Wood Siding
$20.50

Engineered wood siding is priced from $20.50 per square foot. On an 1,800 sq. ft. project, this typically results in a cost between $36,900 and $41,390. Thickness, finish choice, and profile design all factor in.
Metal Siding
$15.00

Metal siding begins at $15.00 per square foot. For a home with 1,800 sq. ft. of siding surface, costs generally fall between $27,000 and $31,800. Final pricing is shaped by panel shape, coating type, and any added insulation.
Aluminum Siding
$30.00

Aluminum siding starts at $30.00 per square foot. For a structure with 1,800 sq. ft. of exterior, this places the total between $48,600 and $59,400. Key cost drivers include panel layout, finish, and fastener selection.
LUX Panel Siding
$15.50

LUX siding is priced from $15.50 per square foot. For 1,800 sq. ft. of wall space, overall project costs usually sit between $25,110 and $30,690. Colour, pattern, and optional upgrades can influence total spend.
Longboard Siding
$18.50

Longboard siding, made with aluminum, begins at $18.50 per square foot. A full 1,800 sq. ft. installation typically ranges from $33,300 to $37,790. Price is affected by the chosen texture, colour, and attachment style.
AL13 Siding
$13.50

AL13 siding begins at $13.50 per square foot. On a structure with 1,800 sq. ft. of exterior area, costs tend to range from $21,870 to $26,730. Final pricing is based on panel size, installation type, and hardware used.
EasyTrim Siding
$13.50

EasyTrim starts at $13.5 per square foot and falls into the higher investment category. For an 1,800 sq. ft. project, pricing depends on the trim design, layout complexity, and system configuration.

Limited-Time Offers: Cut Your Siding Costs in Canmore

At Family Siding, we believe in rewarding our customers with unbeatable deals. If you're upgrading your home or planning a full siding installation, these exclusive promotions make it even easier to get the best quality at the best price.

Earn Up to $1,000 with Referrals

Happy with the results? Refer a friend and receive up to $1,000 once their house siding project is complete. (Minimum project size: 1,500 sq. ft.) Contact us to learn how the referral program works.

10% Off Projects Over 2,000 Sq. Ft.

Got a bigger project lined up? Orders covering more than 2,000 sq. ft. qualify for a 10% discount on the total price.

Save 10% on Select Premium Products

We’ve teamed up with leading manufacturers to offer 10% off a selection of premium siding materials when you buy through Family Siding.

10% Discount for Seniors and Clients with Disabilities

We’re proud to support the Canmore community. Seniors and clients with disabilities receive 10% off house siding installation as part of our appreciation offer.

Lowest Siding Prices in Canmore, Guaranteed

Our pricing is built to stand out. Family Siding quotes average 5% lower than competing siding companies, with no compromise on quality or service.

Already have a written quote? Show us and we’ll beat it.

Claim Your Discount in 3 Simple Steps:

Upload your written estimate
Add your contact info and project details
Send it over. Our team will respond within an hour.

Looking to lower your siding cost in Canmore? Contact us today and see how much you can save.

Top Siding Styles in Canmore

In Canmore, siding must handle shifting weather while keeping your home looking great. The three leading styles are lap siding, large-format panels, and textured shakes or shingles. Explore the options below to find the right fit for your design and performance goals.

1. Lap Siding

Lap siding is a popular choice in Canmore because of its overlapping design, which helps direct rain and snow away from the exterior. It’s available in fibre cement, vinyl, and engineered wood. Fibre cement and engineered wood resist warping, moisture, and cracking. Vinyl is low-maintenance and fade-resistant.

Lap siding also helps promote airflow and adds a thermal buffer that supports energy efficiency. With a wide range of finishes and profiles, it works well for both classic and contemporary homes.

2. Siding Panels

Panel house siding uses broad boards to create a sleek, uniform look. It’s ideal for clean-line designs and comes in materials like metal, fibre cement, and composite blends.

Fibre cement provides durability and resists fire and water.
Metal panels perform well under strong winds and in colder climates.

One major benefit is the ability to cover more surface with fewer seams, which reduces leak risk. Some products also include rainscreens that improve moisture control and ventilation. If you want a bold, modern aesthetic, panels are a smart pick.

3. Shakes and Shingles

Shakes and shingles are ideal for adding depth and natural charm to an exterior. These smaller pieces offer texture and contrast when paired with smoother siding options.

Cedar shakes provide a warm, natural look with built-in insulation. Fibre cement and engineered styles replicate the same detail but with added durability. The layered design helps water drain quickly, reducing maintenance over time.

Choosing the Right Siding for Your Property

Whether you prefer the traditional layout of lap, the clean design of panels, or the texture of shakes and shingles, there’s a match for your style. At Family Siding, we install each type with precision. Contact us today for a free quote.

Portfolio

- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation

Why Camrose Homeowners Choose Family Siding

Personalized Support from Start to Finish
We take time to understand your goals, design preferences, and budget. From consultation through final install, our team stays focused on delivering results that match your expectations.

Read more
Clear Pricing with Real Value
Our estimates usually come in 5% lower than others siding company in the area. No shortcuts, no surprises. Already have a quote? Send it our way. We’ll offer a better price and total clarity before any work begins.

Read more
Materials Built for Canmore’s Weather
We use siding products that hold up in Canmore’s conditions. Backed by trained installers, our materials handle snow, wind, and cold without breaking down over time.

Read more
Styles and Products to Match Any Home
From engineered wood and vinyl to James Hardie and metal siding, we offer a full selection to suit your budget and your look.

Read more
Straightforward Advice You Can Count On
Not sure which type house siding works best? Our team explains your options based on function, design, and long-term value so you can make the right call with confidence.

Read more

Our 5-Step Siding Installation Process in Canmore

Removing the Old Siding

Every project of installation siding in Canmore starts with the careful removal of your current siding. This step helps us uncover any hidden issues and prepares the surface for smooth, problem-free installation.

Inspecting and Repairing the Surface

Once the siding is off, we assess the exposed exterior for signs of damage or structural wear. Any problem areas are addressed right away. This helps prevent moisture problems and ensures the new home siding has a stable surface to attach to.

Prepping the Exterior Walls

A strong installation starts with proper prep. We install insulation, moisture barriers, and protective wrap to improve energy performance and protect against Canmore’s changing weather. Whether you choose vinyl, fibre cement, or metal, this step supports durability.

Installing the New Siding

Installation times vary depending on the shape and size of your home, but most projects are completed within one to two weeks. Each panel is aligned and fastened securely to handle Canmore’s cold spells, snow, and temperature shifts without slipping or buckling.

Final Check and Site Cleanup

After installation, we complete a full inspection to ensure the job meets our standards. We remove all debris and materials from your property. Before we leave, we review care instructions, warranty coverage, and basic maintenance tips so your house siding stays in top shape. At Family Siding, we’re known for clean work, reliable timelines, and quality you can count on. Contact us today to book your free quote.

The Risk

Improper installation can leave uneven seams, misaligned boards, and open gaps. These issues allow moisture to get in, speed up wear, and shorten the life of your siding. Most manufacturers won’t honour warranties if the siding isn’t installed correctly.

Our Solution

Our trained siding installers follow a step-by-step process to ensure every panel is sealed, straight, and ready to handle Canmore’s demanding weather.
The Risk

Unlicensed siding contractors often skip warranty protection or avoid follow-up service. If something goes wrong later, the cost usually falls on you.

Our Solution

We are a responsible siding contractor and provide full warranty coverage on every project. If you have questions after the job is done, our team is easy to reach and ready to help.
The Risk

Rushed or sloppy work can lead to water leaks, poor insulation, and early damage. These problems increase repair costs and drive up energy bills over time.

Our Solution

We use proven materials, quote with accuracy, and complete every install with close attention to detail so your siding performs long-term.

Choose Family Siding for dependable installation, quality products, and siding that holds up in Canmore’s climate. Contact us today to request your free quote.

https://familysiding.com/wp-content/uploads/2024/06/map.webp

Our Service Areas in Canmore

We proudly serve all neighbourhoods in Canmore and the surrounding towns, ensuring homeowners get top-quality siding installation wherever they are.

Canmore

Harvie Heights

Dead Man’s Flats

Exshaw

Lac des Arcs

Gap, Seebe

Ozada

Morley

Benchlands

Ghost Lake

Kananaskis

Kananaskis Village

Duthil

Banff

Castle Junction

Anthracite

Vermilion Crossing

Sawback

Massive

Avens/Canyon Close

Benchlands

Bow Valley Trail

Canyon Ridge

Cougar Creek

Eagle Terrace

Grotto Mountain Village/Glacier Drive

Homesteads

Hospital Hill

Larch

Lion’s Park

Palliser

Peaks of Grassi

Prospect

Quarry Pines

Riverstone

Rundleview

Silvertip

South Canmore

Spring Creek Mountain Village

Teepee Town

Three Sisters Mountain Village

About Family Siding

At Family Siding, we focus on siding installations built to last. With years of experience and a sharp eye for detail, we use reliable materials that protect homes from Canmore’s unpredictable weather.

Our pricing typically comes in 5% lower than competing quotes, and we offer flexible payment plans to keep your siding project on track. Whether you’re making small upgrades or replacing the full exterior, we’re here to help you get it done right.

Email us at info@familysiding.com today for a free estimate and find out why so many homeowners in Canmore choose Family Siding.

https://familysiding.com/wp-content/uploads/2024/05/iStock-1337068310-1.webp

Ready for a complimentary assessment or inspection?

FAQ

How Is Siding Installed?
Here’s a simplified breakdown of how we complete a siding job:
- We begin by taking off the existing siding and checking the exposed wall for any hidden damage. A weather-resistant barrier is then added to protect your home and help extend the life of the new siding.
- Next, we install starter strips and corner posts for materials like vinyl, fibre cement, or engineered wood. This forms a reliable base for everything that follows.
- Each siding board is installed with accuracy and secured using nails or screws to ensure it stays in place.
- To wrap up, we add flashing and trim to protect edges and give your home a clean, polished finish.
When Should You Replace Your Siding?
- Old siding can lead to bigger issues if left unchecked. Watch for signs like cracks, warping, or visible seams separating. These allow water to get in and reduce your siding’s ability to protect your home.
- Faded panels or peeling paint also suggest it may be time for an upgrade.
- If your heating or cooling bills have jumped, the problem may be poor insulation behind the siding.
- Loose or missing panels can point to deeper structural issues.
Spotting these signs early helps you avoid costly repairs. Think your siding might be due for a replacement? Contact us for a free quote.
Should You Repair or Replace Your Siding?
It depends on how much damage you’re dealing with. Minor issues, such as light fading or a few small cracks, can usually be repaired. But if you’re seeing widespread rot, water damage, or warped areas, a full replacement is likely the better choice.
You may want to replace your siding if:
- Energy bills are consistently rising
- You notice moisture inside your walls
- Your siding is more than 20 years old
- You’re constantly spending money on repairs
In many cases, replacing worn siding saves money over time. Reach out and we’ll help you weigh the best option for your property.
Is Vertical or Horizontal Siding Better?
- In Canmore, horizontal siding is the more common option. It installs faster, costs less, and comes in a wide range of materials and finishes. Whether your home is modern or traditional, this format works with most design styles.
- Vertical siding has a sleek, contemporary appearance and can make a home feel taller. It takes a bit more time and budget to install but delivers strong visual impact.
  Your ideal choice depends on your goals and budget. Contact us to explore both styles with a free consultation.
How Much Is Vinyl Siding Per Square Foot?
For a 1,500 square foot home in Canmore, vinyl siding starts around $7.50 per square foot. A complete installation generally ranges from $11,250 to $15,725, depending on materials and prep time.
Additional cost factors include:
- Detail work around windows and corners
- The shape and design of your home
- Removal of old siding
- Extra insulation layers
Simpler projects tend to be more cost-friendly. Complex layouts or material upgrades can raise the total.
What Is the Best Siding for Canadian Winters?
In Canmore, exterior siding must withstand moisture, wind, and freezing temperatures. Top-performing options for cold weather include:
- James Hardie fibre cement: Durable, fire-resistant, and holds colour
- Engineered wood: Looks like real wood and offers added durability
- Metal siding: Aluminum or steel holds up well in snow and ice
- Vinyl siding: Performs well in cold and offers solid value
The right choice depends on your preferred style, budget, and maintenance preferences.
What Is the Most Cost-Effective Exterior Siding?
Getting the most value means considering both initial cost and long-term performance.
- Vinyl siding is the most budget-conscious at $7.50 per square foot. It requires little upkeep and handles cold well.
- Fibre cement and engineered wood cost more upfront but last longer with fewer repairs.
- Metal siding offers high durability and low maintenance but comes with a higher starting price.
Your best option depends on whether you’re focused on saving now or reducing future upkeep.
What Is the Best Siding for Alberta Homes?
Homes in Alberta face snow, wind, sub-zero temperatures, and wide weather shifts. The best exterior siding materials for this region include:
- James Hardie fibre cement
- Engineered wood
- Metal siding (steel or aluminum)
- Vinyl siding
Each option balances protection, style, and durability. The right choice depends on your maintenance tolerance, design goals, and budget.
How Much Is 1,000 Square Feet of Siding?
Here’s a general cost breakdown based on common materials:
- Vinyl Siding: $7,500
- Cedar Siding: $13,500
- Engineered Wood Siding: $20,500
- Metal Siding: $15,000
- Aluminum Siding: $30,000
Final pricing depends on material selection, prep work, insulation needs, and labour. Reach out to Family Siding for a detailed, no-cost quote tailored to your home.