How Is Siding Installed?

Siding installation begins with the removal of any old materials so we can inspect the surface underneath. We check for moisture issues or structural damage and fix any areas that need repair. A moisture-resistant wrap is added next to protect your home. Then we install starter strips and corner posts to support the new siding. Each panel is placed with precision, fastened securely, and finished with trim pieces that seal gaps and create clean, finished lines. This process ensures long-term performance through Edmonton’s weather extremes.

When Should You Replace Your Siding?

If your siding shows signs of cracking, warping, fading, or separating at the seams, it may be time for a full replacement. These issues can let water into your walls and reduce your home’s energy efficiency. Higher utility bills, peeling paint, or interior moisture are also red flags. Spotting these problems early can save you from more expensive repairs down the road. If you’re not sure, contact us and we’ll inspect your siding for free.

Should You Repair or Replace Your Siding?

Small issues such as minor cracks or fading can usually be repaired. However, if your siding has widespread warping, rot, or water damage, a full replacement is usually the better long-term investment. You should also consider replacement if: Energy bills are steadily increasing There’s visible moisture or mold indoors Your siding is older than 20 years You’ve made multiple repairs already We’ll help you compare options and costs so you can make a decision with confidence.

Is Vertical or Horizontal Siding Better?

Horizontal siding is more common in Edmonton and offers a cost-effective solution with a faster installation time. It’s available in vinyl, fibre cement, and engineered wood, and suits both modern and traditional homes. Vertical siding delivers a unique, contemporary look and helps accent taller walls or narrow structures. It typically costs more to install and requires additional planning. We can help you evaluate both styles based on your home’s layout and your design goals.

How Much Is Vinyl Siding Per Square Foot?

Vinyl siding in Edmonton starts at $5.50 per square foot. For a 1,500 square foot home, total costs usually range from $8,250 to $13,500. The final price depends on the material grade, trim details, wall prep, and whether insulation is added. Simple layouts are quicker and less expensive, while complex designs or custom features will raise the overall cost.

What Is the Best Siding for Canadian Winters?

In Edmonton, siding must resist extreme cold, moisture, and fast temperature changes. Top-performing materials for winter include: James Hardie fibre cement for its durability and fire resistance Engineered wood siding for natural texture with added strength Metal siding for impact resistance and weather stability Vinyl siding for solid insulation at a lower cost Each material has its own advantages. The best option depends on your priorities for budget, appearance, and long-term care.

What Is the Most Cost-Effective Exterior Siding?

Vinyl siding offers the best mix of affordability and performance. It’s priced competitively, easy to maintain, and holds up well in Edmonton’s cold climate. Engineered wood and fibre cement cost more at the start but provide strong durability over time. Metal siding has a higher initial cost but requires very little maintenance. We’ll help you compare lifetime costs to find the best value for your home.

What Is the Best Siding for Alberta Homes?

Alberta homes, especially those in Edmonton, face snow, wind, deep freezes, and sudden thaws. The most trusted siding materials include: James Hardie siding Engineered wood Metal siding and steel panels Vinyl siding We recommend choosing a material that fits your weather exposure, design vision, and maintenance expectations.

How Much Is 1,000 Square Feet of Siding?

Here’s a rough breakdown of siding installation costs for a 1,000 square foot area in Edmonton: Vinyl Siding: $5,500 Cedar Siding: $9,750 Engineered Wood Siding: $10,750 Metal Siding: $11,000 Aluminum Siding: $15,000 These are ballpark figures. For a quote based on your home’s exact layout and material choices, contact us for a free estimate.

Siding in Edmonton by Trusted Contractors

Guaranteed Quote Within 24 Hours & Free, On-Site Consultation
Flexible Financing + Limited-Time Promotions
We Beat Competitor Quotes by 5% - Transparent Pricing

Online Quote

Order a callback

Tell us about your project, and we’ll be in touch shortly.

https://familysiding.com/wp-content/uploads/2025/03/main-page-Frame-384-2.jpg

A Message from Brian, Owner of Family Siding

Brian Davis

CEO of Family Siding

Hi, I’m Brian. After more than 30 years in the siding industry, I’ve seen firsthand that no two homes are the same, especially in a place like Edmonton where the climate brings its own set of challenges. At Family Siding, we take time to understand your needs and install siding in Edmonton that is not only durable but also fits your property’s structure and design.

Installation That Holds Up

When installing siding in Edmonton, our team follows manufacturer specifications without exception. We don’t skip steps or rush through jobs. We do the work right the first time so it holds up for years.

Full-Service from Start to Finish

From your first inquiry to the final walkthrough, we manage everything directly. There are no hand-offs or missed details. We keep your project on time and on track.

Built for Edmonton Weather

The conditions here can shift quickly, from freezing cold to sudden warm spells. Our siding products are selected specifically to perform well in these conditions without bending, cracking, or warping.

Protect Your Building Year-Round

We install siding made to handle the real weather challenges of Edmonton. Let’s connect and get your exterior protected and updated today.

About Us

Brian Davis

CEO of Family Siding

Our Siding Services in Edmonton

1. James Hardie Siding

Edmonton weather can be rough on home exteriors, but James Hardie siding is designed to withstand it. Made from fibre cement, it resists moisture, pests, and wide temperature swings. Unlike vinyl or wood, it does not swell, split, or warp with seasonal changes. With a wide selection of finishes and colours, James Hardie siding gives your home a polished look while adding insulation that helps control indoor temperatures and reduce outside noise.

At Family Siding, we follow the exact installation guidelines to make sure it performs to its full potential. Book your no-cost estimate today and protect your home with siding built for Edmonton.

2. Vinyl Siding

With Edmonton’s unpredictable weather, vinyl siding is a smart, low-maintenance choice. It holds up well in wind, cold snaps, and heat while needing very little upkeep. A quick rinse is usually all it takes to keep it looking sharp. Available in a wide range of colours and patterns, vinyl siding gives your home an instant exterior upgrade. It also adds insulation value, helping to lower energy bills all year.

Our crew installs vinyl siding with care and accuracy so it stays secure and lasts longer. Request your free quote now.

3. Metal Siding

In Edmonton, fast temperature changes are common. Metal siding holds its form and resists cracking or warping, even under heavy snow and wind. Metal siding also offers built-in resistance to moisture, fire, and impact. It comes in several modern finishes and styles, giving your property a sharp look with minimal maintenance.

Our exterior siding follow a step-by-step process to ensure long-term performance and insulation benefits. Book your free quote for metal siding today.

4. Cedar Siding

Cedar siding brings natural beauty and strong performance. It handles moisture, mold, and shifting weather conditions without needing chemical treatments. Beveled cedar helps water run off, while channel cedar adds depth and texture to your exterior. Both options of this house siding help balance your home’s interior temperature through Edmonton’s changing seasons.

At Family Siding, we take extra care when installing cedar siding to ensure tight seams and a clean finish. Contact us today for a personalized quote.

5. Longboard Siding

Longboard siding offers the warmth of wood without the wear and tear. Made from durable aluminum, it resists fading, moisture, and damage through every season in Edmonton. It is lightweight, strong, and available in both rich woodgrain and solid colour options. Longboard siding holds its appearance without frequent maintenance.

Our team installs it with precision to ensure smooth lines and lasting appeal. Schedule your no-obligation Longboard siding estimate now.

6. LUX Siding

LUX siding provides a clean, modern finish that is made to withstand severe weather. It does not dent, peel, or lose shape under harsh conditions. Choose from woodgrain, solid tones, or metallic options that match your home’s look. LUX siding also improves insulation during colder months.

We install every panel securely and follow manufacturer standards to ensure a polished, durable result. Contact us to learn more and get your LUX siding quote.

7. EasyTrim Siding

If you want crisp edges and a seamless finish, EasyTrim is a reliable trim system. It pairs with most panel siding types and holds strong in Edmonton’s changing weather. This aluminum trim seals joints and resists cracking, all while providing a refined architectural look.

Our siding team applies EasyTrim with close attention to detail so your home’s finish stays consistent and protected. Reach out for your EasyTrim siding quote today.

8. Engineered Siding

Engineered siding gives you the natural look of wood with improved strength. It resists moisture, changing temperatures, and long-term wear without losing shape or colour. Engineered board and batten styles add structure and design depth.

Our siding installers use trusted techniques to make sure your exterior holds up in Edmonton’s tough climate. Contact us today for a free estimate on longboard siding.

9. Aluminum Siding

Aluminum siding is both lightweight and tough, making it a smart fit for Edmonton homes. It won’t fade, warp, or absorb water, even in cold and wet weather. The colour finish is baked on, which means it stays vibrant longer.

With many style options available, aluminum siding can match almost any home design. Our team installs it cleanly and securely for lasting protection. Book your aluminum siding quote today.

10. AL13 Siding

AL 13 siding is engineered from aluminum and built for harsh Canadian conditions. It keeps its shape, colour, and finish throughout weather swings in Edmonton. You can choose from a variety of finishes and configurations to match modern or traditional homes. AL 13 also helps insulate your home and lower energy usage throughout the year.

Our siding experts install AL 13 using precise methods to ensure reliable performance. Contact us now for your quote.

Average Cost of Siding Installation in Edmonton

Siding installation costs in Edmonton depend on several factors including material selection, total square footage, condition of the existing exterior, and overall project complexity. The following breakdown gives you a clear idea of what to expect when budgeting for different siding types. For a more accurate quote, click on any category or contact us directly.

James Hardie Siding
$9.50

James Hardie siding begins at $9.50 per square foot. For an 1,800 square foot install, the expected range is $17,100 to $24,300. The cost can change based on colour selection, trim features, and the complexity of the installation.
Vinyl Siding
$5.50

Starting at $5.50 per square foot, vinyl siding installation for an 1,800 square foot property in Edmonton typically costs between $9,900 and $16,200. Final pricing will depend on the design features, insulation upgrades, and time needed for preparation and labour.
Cedar Siding
$9.75

Cedar siding begins at $9.75 per square foot. For a home with 1,800 square feet of exterior coverage, you can expect to spend between $17,550 and $29,700. Costs can shift based on the wood grade, finish preference, and the style of installation.
Engineered Wood Siding
$10.75

Engineered wood siding is priced from $10.75 per square foot. For a typical 1,800 square foot exterior, the total investment usually ranges from $19,350 to $27,000. Variables like board thickness, surface finish, and panel design impact the final amount.
Metal Siding
$11.00

Metal siding starts at $11.00 per square foot. Covering an 1,800 square foot area typically results in a total project cost between $19,800 and $29,700. Panel style, protective coatings, and insulation features contribute to the total price.
Aluminum Siding
$15.00

Aluminum siding generally starts at $15.00 per square foot. For a property with 1,800 square feet of wall surface, the cost usually lands between $27,000 and $51,300. Pricing is influenced by finish type, installation method, and fastener system.
LUX Panel Siding
$14.75

LUX panel siding begins at $14.75 per square foot. For an 1,800 square foot project, expect a cost between $26,550 and $48,600. Style selection, accessories, and layout decisions influence overall pricing.
Longboard Siding
$18.25

Longboard siding starts at $18.00 per square foot. Installing it on an 1,800 square foot home typically falls between $32,850 and $45,900. Factors such as profile type, colour tone, and attachment systems will affect the total.
AL13 Siding
$18.00

AL13 siding begins at $18.00 per square foot. For an area of 1,800 square feet, installation costs typically range from $32,400 to $44,100. Panel dimensions, layout design, and fastener type all contribute to final pricing.
EasyTrim Siding
$21.50

EasyTrim siding is priced from $21.5 per square foot, placing it among the higher-end finishing systems. Final cost for a project covering 1,800 square feet depends on the amount of trim used, panel integration, and attachment specifics.

Siding Prices in Edmonton

Edmonton's housing stock runs from 1950s bungalows to brand new infills, and its deep cold winters put a premium on proper moisture detailing and cold weather rated materials. Pricing here is the capital region benchmark.

Service Description / Use Case Estimated Cost (CAD)

Vinyl Siding Most affordable full home option, insulated panels available $5.50 to $9.00 per sq ft
James Hardie Siding Fibre cement lap, panel and shingle; 30 year substrate warranty $9.50 to $13.50 per sq ft
Cedar Siding Natural western red cedar, knotty to clear grades, stained $9.75 to $16.50 per sq ft
Engineered Wood Siding LP SmartSide class product, primed or factory prefinished $10.75 to $15.00 per sq ft
Metal Siding (Steel) Class A fire rated, Level 4 hail impact rated profiles $11.00 to $16.50 per sq ft
LUX Panel Siding Prefinished steel architectural panels, wood grain and metallic finishes $14.75 to $27.00 per sq ft
Aluminum Siding Premium extruded plank systems, wood look and solid architectural finishes $15.00 to $28.50 per sq ft
AL13 Panel System Architectural aluminum composite rainscreen for feature walls $18.00 to $24.50 per sq ft
Longboard Siding Premium extruded aluminum wood look planks, zero maintenance $18.25 to $25.50 per sq ft
EasyTrim Quick Panel Modular ACM rainscreen system, the commercial look at lower cost $21.50 to $27.50 per sq ft
Soffit and Fascia Ventilated aluminum or matching material roofline package $8.00 to $13.50 per linear ft
Trim and Corner Package Matching corners, transitions and detail trims $7.00 to $20.00 per linear ft
Tear Off and Disposal Removing and hauling away existing siding $1.00 to $3.75 per sq ft
Two Storey Access Premium Added labour and staging for full two storey homes +15% on wall labour
Whole Home Reference Typical 1,800 sq ft two storey, vinyl through Hardie spec range $10,500 to $26,500

Limited-Time Deals: Reduce Your Siding Costs in Edmonton

At Family Siding, we believe in rewarding our customers with unbeatable deals. If you're upgrading your home or planning a full siding installation, these exclusive promotions make it even easier to get the best quality at the best price.

Get Up to $1,000 Back

If you refer someone to us and they complete a siding project of at least 1,500 square feet, you can earn up to $1,000. It’s our way of saying thank you for sharing our name. Ask us how to get started with the referral program.

Save 10% on Projects Over 2,000 Sq. Ft.

If your siding project covers 2,000 square feet or more, you qualify for an automatic 10 percent discount. Larger projects come with more materials and labour, and this offer helps bring those total costs down.

10% Off on Select Premium Siding

We’ve partnered with leading siding manufacturers to offer a 10 percent discount on specific premium materials. These include select products from brands known for style and durability. Ask us which materials qualify for siding in Edmonton.

10% Off for Seniors and Clients with Disabilities

Family Siding supports the Edmonton community by offering a 10 percent discount to seniors and individuals with disabilities. This appreciation offer helps make quality home upgrades more accessible.

Lowest Siding Rates in Edmonton — Guaranteed

Our estimates average 5 percent below those of other siding companies in Edmonton. If you have already received a written quote, send it to us and we will beat the price without cutting corners on service or materials.

How to Claim Your Discount:

Save or download the written estimate you received from another siding company.
Fill in your name, contact information, and project details.
Send it to our team through email or upload it directly to our website.

We will respond within the hour with a revised quote based on your discount eligibility.

Looking to save on your siding installation in Edmonton? Contact Family Siding today and see how much you can reduce your total project cost.

Top Siding Styles in Edmonton

Edmonton’s seasonal swings demand siding that does more than enhance curb appeal. It must also offer lasting protection, solid insulation, and long-term durability. These three styles of siding in Edmonton are the most popular among local homeowners thanks to their performance and visual impact.

1. Lap Siding

Lap siding remains a strong choice in Edmonton due to its overlapping board design, which directs water and snow away from the building. Available in vinyl siding, fibre cement, and engineered wood, each material offers its own benefits. Fibre cement and engineered wood siding are known for resisting warping, cracking, and water damage, while vinyl siding offers a fade-resistant, low-maintenance solution.

Lap siding also supports better airflow and helps regulate indoor temperatures. With a wide variety of textures and colours, it suits both classic and modern home styles.

2. Siding Panels

Panel siding features wider, flatter surfaces for a clean and uniform exterior finish. Ideal for homeowners seeking a minimalist or contemporary design, siding panels are commonly made from fibre cement, composite materials, or metal siding. Fibre cement panels add fire and water resistance, while metal siding panels offer strong performance in high wind or extreme cold.

A major advantage of this siding type is the reduced number of seams, which lowers the risk of moisture infiltration. Some panel systems include rainscreens that help improve airflow and manage condensation more effectively.

3. Shakes and Shingles

For homeowners who prefer texture and depth, shakes and shingles offer a distinct visual style. These layered components provide a more traditional or rustic feel, depending on the material. Cedar shakes give you rich woodgrain, added insulation, and natural resistance to pests and moisture. Engineered and fibre cement alternatives are available for greater durability and lower upkeep.

The overlapping layout helps shed water effectively, which makes these styles easier to maintain through Edmonton’s rainy and snowy seasons. Many homeowners use shakes and shingles on gables or accent walls to create contrast and detail.

Portfolio

- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation

Why Edmonton Homeowners Choose Family Siding

Tailored Service from Start to Finish
We take the time to understand your goals, whether that means upgrading insulation, improving curb appeal, or staying within budget. From the first consultation to final installation, our focus is on delivering siding that fits your home perfectly.
Clear, Competitive Pricing
Our estimates are usually five percent lower than what other siding companies in Edmonton charge. If you’ve already received a quote, share it with us and we’ll give you a better offer with the same or better materials. You’ll get full transparency before any work begins.
Reliable Materials and Skilled Installation
We use materials from top siding manufacturers that are proven to hold up in northern Alberta’s conditions. From fibre cement and engineered wood to metal and vinyl siding, our installers know how to get it done right, even in freezing temperatures and high wind.
Styles and Materials for Every Home
Whether your home needs a classic upgrade or a bold, modern look, we offer siding styles that match both your vision and your home’s structure. Choose from trusted materials like James Hardie siding, engineered wood siding, metal panels, and vinyl siding.
Trusted Advice That Makes Decisions Easier
If you’re unsure which material or design is the right fit, we break down the pros and cons based on energy savings, appearance, and long-term maintenance. You’ll get the information you need to make the right call for your home.

Our 5-Step Siding Installation Process in Edmonton

Removing the Old Siding

We begin by carefully removing your home’s existing siding. This allows us to see the full condition of the structure underneath and sets the foundation for a clean, secure installation. Any damage hidden by the old siding can be properly addressed before the new materials go on.

Inspecting and Repairing the Surface

With the surface exposed, we inspect the sheathing for any signs of moisture damage, rot, or structural wear. If there are any weak spots, we fix them immediately so your new siding will have a strong, level surface to attach to.

Prepping the Exterior Walls

Next, we prepare your walls with moisture barriers, insulation upgrades, and protective wrap. These layers improve energy efficiency and help your siding resist wind, snow, and ice: something that’s especially important in Edmonton’s climate.

Installing the New Siding

We install each panel or board with precision, using fastening systems that match the material type and building structure. Most residential siding projects take one to two weeks, depending on your home’s size and layout. Our installers work carefully to ensure long-term durability and a consistent finish.

Final Check and Clean-Up

After installation, we complete a detailed inspection to make sure everything is done right. We remove all worksite debris, review product warranties, and walk you through basic siding care and maintenance. Before we leave, we make sure you know how to keep your new exterior in excellent shape. At Family Siding, we protect your investment with a process that delivers strong results from start to finish. Book your free quote today and see the difference for yourself.

The Risks of Hiring Inexperienced Siding Installers

The Risk

When house siding is installed incorrectly, you may end up with uneven seams, visible gaps, or panels that shift over time. These flaws allow water to get behind the siding, which leads to structural damage and early wear. Many siding manufacturers will void their warranty if their materials are not installed according to specific guidelines.

Our Solution

At Family Siding, we follow the exact installation instructions provided by each manufacturer. Whether we’re working with vinyl siding, engineered wood, James Hardie siding, or metal panels, our team ensures everything is aligned, secured, and sealed to prevent moisture problems and keep warranties valid.
The Risk

Siding contractors without proper certification often skip critical paperwork, avoid registering product warranties, or disappear after the job is done. If something fails a few months later, you are left with no support and the full cost of repairs on your shoulders.

Our Solution

We provide full warranty coverage on both materials and labour. If you experience an issue after installation, we are available to troubleshoot and solve the problem quickly. You will always have someone to call if you need help.
The Risk

Low-quality house siding installation can reduce energy efficiency, increase the chance of leaks, and make your home more vulnerable to the elements. Over time, this leads to higher energy bills, faster wear, and costly repairs.

Our Solution

We use reliable house siding products designed for Edmonton weather, and we install them with attention to detail. The result is better insulation, longer-lasting protection, and a finished look you can count on.

When you hire Family Siding, you get trained professionals, proven materials, and a final result that adds value and protection to your home. Reach out today to schedule your no-obligation quote.

https://familysiding.com/wp-content/uploads/2024/06/map.webp

Our Service Areas in Edmonton

We proudly serve all neighbourhoods in Edmonton and the surrounding area, so you can count on premium-quality siding installation wherever you are.

St. Albert

Sherwood Park

Fort Saskatchewan

Spruce Grove

Stony Plain

Leduc

Beaumont

Devon

Nisku

Acheson

Morinville

Ardrossan

Calmar

New Sarepta

Thorsby

Telfordville

Warburg

Tofield

Lamont

Redwater

Bon Accord

Gibbons

Legal

Bruderheim

Cooking Lake

South Cooking Lake

Looma

Uncas

Parkland Village

Golden Spike

Wabamun

Alberta Beach

Calahoo

Onoway

Gunn

Chipman

Hay Lakes

Round Hill

Millet

Wetaskiwin

Camrose

Holden

Vegreville

Andrew

Smoky Lake

Two Hills

Mundare

Bremner

Whitecroft

Duagh

Volmer

Villeneuve

Namao

Carlton

Oxford

Cumberland

Hudson

Baranow

Caernarvon

Dunluce

Beaumaris

Lorelei

Baturyn

Canossa

Rapperswill

Griesbach

Klarvatten

Schonsee

McConachie

Hollick-Kenyon

Brintnell

Cy Becker

Miller

Casselman

Belvedere

Delwood

Kildare

Balwin

McLeod

Evansdale

Windermere

Ambleside

Terwillegar Towne

South Terwillegar

Magrath Heights

MacTaggart

Haddow

Falconer Heights

Hodgson

Leger

Rhatigan Ridge

Ramsay Heights

Brookside

Bulyea Heights

Ogilvie Ridge

Blue Quill

Sweet Grass

Greenfield

Duggan

Steinhauer

Ermineskin

Keheewin

Bearspaw

Twin Brooks

Skyrattler

Summerside

Ellerslie

Charlesworth

Walker

Laurel

Silver Berry

Wild Rose

Tamarack

The Meadows

Jackson Heights

Kiniski Gardens

Minchau

Bisset

Weinlos

Meyokumin

Sakaw

Crawford Plains

Pollard Meadows

Tawa

Tipaskan

Richfield

Lee Ridge

Hillview

Greenview

Daly Grove

The Hamptons

Glastonbury

Granville

Secord

Rosenthal

Webber Greens

Suder Greens

Breckenridge Greens

Potter Greens

La Perle

Belmead

Aldergrove

Lymburn

Ormsby Place

Callingwood North

Callingwood South

Thorncliffe

Summerlea

Terra Losa

West Meadowlark Park

Glenwood

Meadowlark Park

Siding Contractors in Edmonton: Protecting Homes & Businesses in Every Season

Replacing the siding on your home or business is one of the best ways to transform your property’s look while also increasing its protection from the elements.

But it’s not as simple as just picking the first option for siding replacement in Edmonton. The key is in the details:

What conditions in Edmonton should influence your siding choice?
Which siding contractor in Edmonton will you choose?
What siding materials are available and appropriate?
What influences the total project cost?

We’ll help you answer all these questions so that your property gets the perfect business or home siding in Edmonton that lasts for decades.

Does Siding Require Professional Installation?

While certain siding materials will lend themselves to a DIY project, as your home or business’s first line of defense against the elements, it’s not recommended.

A reputable Edmonton siding company like Family Siding will know all the pertinent weather issues to consider, have years of experience, and be meticulous about the details.

For example, fiber cement siding in Edmonton is a great choice, but it can be tricky to cut and can be damaged easily when you’re not familiar with the product. With metal siding in Edmonton, cut panels can be sharp, and managing thermal expansion requirements is a challenge for DIYers.

Why Siding Installation in Edmonton Should Be Left to the Experts

Edmonton’s weather is extreme. Huge temperature swings, high snowfall, lots of rain, and the sun’s UV rays can all damage or weaken siding here:

Heavy rainfall – Recent record-breaking rainfall in Edmonton means more moisture incursion potential for siding with small cracks, slight installation damage, and weak seams.
High winds – When not fastened expertly and securely, siding can come loose or even rip away in windstorms.
Excessive snowfall – Snow buildup over the winter along the building’s perimeter can cause issues, too. The consequences are prolonged moisture exposure and damage due to the weight if the snow is piled against the structure. As it starts to warm up, the melting snow can force moisture through siding imperfections. The result? Warping and rotting, or dangers like mold.
High summer sun exposure – The experts at Family Siding can recommend the best materials to stand up to the intense Edmonton sun.
Freeze-thaw cycles – When installed without precision, commercial and residential siding in Edmonton is much more susceptible to the changing temperatures. As it turns to ice, trapped water will expand and make cracks worse over time.

Your Exterior Siding Contractor in Edmonton: Making the Right Choice

Siding contractors in Edmonton don’t all value the same things or work the same way. That said, here are the top things to research before you commit:

Local. It’s important that your siding company in Edmonton knows the local environment well. That knowledge influences installation styles, siding materials, and site preparation.
Siding experience. You don’t want your home or business to be a trial run for a new siding company in Edmonton. Instead, look for ones with at least a few years of experience, but more is even better.
Selection of materials. Different siding situations call for different materials. The durability and look vary between options. For example, while vinyl siding is the most affordable, it’s not as durable as metal or Hardie siding in Edmonton.
Reliable proposals. When you get an estimate for a siding project, you want to be able to count on it. Select Edmonton siding contractors that have a reputation for sticking to their word.
Licensing & insurance. Choose companies that have insurance in place to protect the structure, the crew, and you. They should also have a City of Edmonton business license.

A siding company in Edmonton that ticks all the boxes, like Family Siding, is always your best bet.

The Cornerstones of Professional Siding Installation in Edmonton

Your siding needs a plan. The weather in Edmonton is unforgiving and will quickly cause damage or moisture issues without proper installation. Siding installers in Edmonton that don’t follow the proper guidelines can void your manufacturer’s warranty.

Here are the major factors involved in any Family Siding exterior renovation in Edmonton.

Spacing

As mentioned, thermal movement due to freeze-thaw cycles is a real concern. Installation needs to account for it:

Too much space = moisture incursion risk
Not enough space = boards that butt up against each other, causing damage

Note: Spacing is especially important for vinyl siding. Why? The PVC content makes it more sensitive to temperature changes. It’s also important for cedar siding, as moisture can cause the siding to expand.

Moisture

Siding in Edmonton is only one of the defenses your home has against moisture. Any professional siding in Edmonton has to include a moisture barrier under the siding. Not only that, seams and openings like doors, windows, and vents need careful attention, as they are common points of moisture ingress.

Fastening

Secure is the keyword here. Wind and storms happen, and what you don’t want is your Edmonton siding coming off just when you need it most. Flashing and siding boards can be ripped off the building if they’re not fastened securely. That means the right fasteners and the right component positioning to avoid updrafts where possible.

Tip: For a more streamlined look, choose metal siding in Edmonton. And specifically, the LUX Panel, AL13, and Longboard styles – they all have concealed fasteners.

Preparation

Similar to painting any surface, the right site and structure preparation is key. Start from a debris-free, flat surface, and you have the perfect base to install the house wrap and the siding. Most siding contractors in Edmonton will conduct a pre-proposal site visit to assess the required prep work and the structure’s ability to accommodate the installation.

Note: In some cases, when the existing structure is sound, our experienced Edmonton siding installers can put the new siding right over the old. This often works best with existing metal and vinyl siding.

The Top Siding Choices in Edmonton

At Family Siding, we offer a broad selection of siding materials, so it’s easy to get the look you want and the durability you need.

Vinyl siding in Edmonton is the most affordable; metal options are maintenance-free and extremely durable, and both cedar and engineered wood options offer a warm, character-filled aesthetic. Here’s a summary of our most popular ones:

Siding Option	Best for	Key Advantages	Considerations
Vinyl	Lower budgets	• Affordable and widely available • Low maintenance • Performs well through cold snaps and seasonal temperature changes • Insulated options available	Less impact-resistant and premium-looking than some higher-cost materials.
Fiber cement / James Hardie	All-around durability	• Resistant to moisture and pests • Excellent fire resistance • James Hardie siding in Edmonton handles temperature swings well • Wide choice of colours, profiles, and finishes • Works with traditional and contemporary homes	Costs more than vinyl and is heavier than engineered wood or metal.
Cedar	Natural appearance and character for homes	• Genuine natural wood grain • Good insulating properties • Cedar siding in Edmonton is naturally resistant to moisture & pests • Available in traditional and contemporary profiles	More ongoing maintenance than metal or fiber cement.
Engineered wood	A wood look with less maintenance	• Provides the warmth and appearance of wood • Resistant to cracking and splitting • Good impact resistance • Performs well through freeze-thaw cycles	Factory finishes eventually require repainting, so it isn’t maintenance-free.
Metal	Maximum weather and impact resistance	• Excellent resistance to snow, wind, and moisture • Fire-resistant and lightweight • Handles abrupt temperature changes well • Steel siding in Edmonton provides excellent impact resistance • Available in architectural and wood-look finishes	Higher upfront cost than vinyl.
LUX Panel	Modern and high-end architectural exteriors	• Canadian-made 24-gauge Galvalume steel • Concealed-fastener system • Highly resistant to weather and impact • Fire-, fade-, and corrosion-resistant • Very little maintenance required • Available in woodgrain and metallic finishes	One of the more expensive choices, and its distinctly contemporary appearance won’t suit every property.

While metal siding is a broad category, our product line includes steel and aluminum siding for Edmonton property owners.

Aluminum siding comes in standard boards and panel systems like AL13, EasyTrim, and Longboard siding in Edmonton.

What Influences Siding Replacement Cost in Edmonton?

Aside from the most obvious factor, building size, other factors can sway the project cost up or down:

Material chosen – Vinyl is cheaper than most alternatives, whereas metal systems like LUX Panel are more expensive.
Site prep – If the current building doesn’t require any fixes and the new siding can be installed over the old siding, it’s most affordable.
Insulation – Siding installation in Edmonton often benefits from insulation, and the time to do it is before any new siding is installed. With the cold temperatures here, metal and Hardie board in Edmonton are good candidates for this upgrade.
Project complexity – More openings, intricate designs, and decorative trim work can all increase the total siding cost.

Since every siding installation in Edmonton is different, the safest thing to do is to contact us for a free, detailed cost specific to you. We’ll remove the guesswork, and you’ll know whether or not your dream exterior siding in Edmonton is within reach. Plus, our financing options can help.

Why Family Siding is the Top Exterior Siding Contractor in Edmonton

Local siding installers
Both residential and commercial siding services
Repairs, upgrades, and new siding installation
Great selection of materials tailored to Edmonton’s climate
Proven craftsmanship with over 20 years of experience
Reliable estimates
Fully insured

A top-quality siding renovation in Edmonton needs an expert touch. Rely on the professional team at Family Siding to guide you through the material selection, design finalization, and build process. The first step is simple: contact us for your free quote.

About Family Siding

Family Siding is dedicated to providing home siding installation that Edmonton homeowners can rely on for years. We bring decades of hands-on experience to every project and work with siding products that are proven to perform in Alberta’s unpredictable climate.

Our team installs each type of siding with care and accuracy, whether you’re going with James Hardie siding, vinyl siding, engineered wood, or metal panels. We handle everything from planning and prep to final cleanup, ensuring that every detail is addressed and your property is well protected.

We also believe in fair pricing. Most of our estimates come in five percent below those of other siding companies in Edmonton, and we offer flexible financing options to help you stay on budget without cutting corners.

Whether you’re refreshing a small section of your home or planning a full exterior renovation, we’re ready to get the job done the right way. Our reputation is built on trust, craftsmanship, and siding that holds up under pressure.

Email us at info@familysiding.com or call at 877-545-5995 today to get your free quote and discover why homeowners across Edmonton choose Family Siding.

https://familysiding.com/wp-content/uploads/2024/05/iStock-1337068310-1.webp

Ready for a complimentary assessment or inspection?

FAQ

How Is Siding Installed?
- Siding installation begins with the removal of any old materials so we can inspect the surface underneath.
- We check for moisture issues or structural damage and fix any areas that need repair. A moisture-resistant wrap is added next to protect your home.
- Then we install starter strips and corner posts to support the new siding.
- Each panel is placed with precision, fastened securely, and finished with trim pieces that seal gaps and create clean, finished lines. This process ensures long-term performance through Edmonton’s weather extremes.
When Should You Replace Your Siding?
- If your siding shows signs of cracking, warping, fading, or separating at the seams, it may be time for a full replacement. These issues can let water into your walls and reduce your home’s energy efficiency.
- Higher utility bills, peeling paint, or interior moisture are also red flags. Spotting these problems early can save you from more expensive repairs down the road.
- If you’re not sure, contact us and we’ll inspect your siding for free.
Should You Repair or Replace Your Siding?
Small issues such as minor cracks or fading can usually be repaired. However, if your siding has widespread warping, rot, or water damage, a full replacement is usually the better long-term investment. You should also consider replacement if:
- Energy bills are steadily increasing
- There’s visible moisture or mold indoors
- Your siding is older than 20 years
- You’ve made multiple repairs already
  We’ll help you compare options and costs so you can make a decision with confidence.
Is Vertical or Horizontal Siding Better?
- Horizontal siding is more common in Edmonton and offers a cost-effective solution with a faster installation time. It’s available in vinyl, fibre cement, and engineered wood, and suits both modern and traditional homes.
- Vertical siding delivers a unique, contemporary look and helps accent taller walls or narrow structures. It typically costs more to install and requires additional planning. We can help you evaluate both styles based on your home’s layout and your design goals.
How Much Is Vinyl Siding Per Square Foot?

Vinyl siding in Edmonton starts at $5.50 per square foot. For a 1,500 square foot home, total costs usually range from $8,250 to $13,500. The final price depends on the material grade, trim details, wall prep, and whether insulation is added. Simple layouts are quicker and less expensive, while complex designs or custom features will raise the overall cost.
What Is the Best Siding for Canadian Winters?
In Edmonton, siding must resist extreme cold, moisture, and fast temperature changes. Top-performing materials for winter include:
- James Hardie fibre cement for its durability and fire resistance
- Engineered wood siding for natural texture with added strength
- Metal siding for impact resistance and weather stability
- Vinyl siding for solid insulation at a lower cost
  Each material has its own advantages. The best option depends on your priorities for budget, appearance, and long-term care.
What Is the Most Cost-Effective Exterior Siding?
- Vinyl siding offers the best mix of affordability and performance. It’s priced competitively, easy to maintain, and holds up well in Edmonton’s cold climate.
- Engineered wood and fibre cement cost more at the start but provide strong durability over time.
- Metal siding has a higher initial cost but requires very little maintenance. We’ll help you compare lifetime costs to find the best value for your home.
What Is the Best Siding for Alberta Homes?
Alberta homes, especially those in Edmonton, face snow, wind, deep freezes, and sudden thaws. The most trusted siding materials include:
- James Hardie siding
- Engineered wood
- Metal siding and steel panels
- Vinyl siding
We recommend choosing a material that fits your weather exposure, design vision, and maintenance expectations.
How Much Is 1,000 Square Feet of Siding?
Here’s a rough breakdown of siding installation costs for a 1,000 square foot area in Edmonton:
- Vinyl Siding: $5,500
- Cedar Siding: $9,750
- Engineered Wood Siding: $10,750
- Metal Siding: $11,000
- Aluminum Siding: $15,000
  These are ballpark figures. For a quote based on your home’s exact layout and material choices, contact us for a free estimate.