How Is Siding Installed?

The installation process begins by removing any existing siding to expose the structure underneath. We carefully inspect the surface for hidden damage or wear. Once the area is cleared and prepped, a moisture-resistant barrier is applied to protect your home and extend the lifespan of the new siding. We then install starter strips and corner posts to create a level base for vinyl siding, fibre cement, or engineered wood. Each panel is placed with precision and secured using the correct fasteners. The job is finished with trim and flashing to seal joints and give your exterior a clean, professional finish.

When Should You Replace Your Siding?

Old or damaged siding can create larger issues if ignored. Cracks, warping, or loose seams allow water to enter, which weakens the wall underneath and increases the risk of mold or rot. Fading, peeling, or bubbling paint can also be signs that your siding no longer protects your home. Higher energy bills may point to insulation failure behind the siding. If panels are falling off or look uneven, structural problems may be developing. These signs often mean it’s time to replace your siding. Contact us for a free inspection and honest advice.

Should You Repair or Replace Your Siding?

Whether you need repairs or a full replacement depends on the extent of the damage. Small issues like surface fading or a few cracked panels can usually be fixed. If there are signs of rot, water damage, or consistent warping across large sections, replacement is often the smarter and more cost-effective option. You should consider replacing your siding if: ● Energy bills are rising without explanation ● Moisture or mold appears inside your home ● Your siding is more than 20 years old ● Repairs are becoming frequent and expensive Our team will review your situation and help you choose the best solution based on cost, condition, and long-term results.

Is Vertical or Horizontal Siding Better?

In Red Deer, horizontal siding is more common because it installs faster, costs less, and is available in a wider range of colours and materials. It suits both traditional and modern homes. Vertical siding in Red Deer gives homes a taller, more contemporary look and adds visual interest, but it may require more time and a higher budget for proper installation. The better option depends on your home’s design, your budget, and the final look you want. We can walk you through both to find what works best.

How Much Is Vinyl Siding Per Square Foot?

For a 1,500 square foot home in Red Deer, vinyl siding starts at $20.50 per square foot. The total project cost generally falls between $30,750 and $37,725 depending on the product quality, labour needs, and any extras like trim or insulation. The shape of your home and how much prep is involved will also affect the price. Simpler installs cost less, while custom layouts or added upgrades will increase the final amount.

What Is the Best Siding for Canadian Winters?

In Red Deer, siding must hold up against freezing temperatures, snow, wind, and ice. The most reliable materials for cold climates include: ● James Hardie fibre cement for its fire resistance and stable colour ● Engineered wood for the natural look with better strength ● Metal siding for its resistance to snow and temperature swings ● Vinyl siding for affordability and energy efficiency Each material performs well, but the right choice depends on your budget, design preferences, and how much maintenance you’re willing to manage.

What Is the Most Cost-Effective Exterior Siding?

Vinyl siding is the most budget-friendly option, priced at $20.50 per square foot. It delivers reliable insulation, minimal upkeep, and solid protection in cold climates like Red Deer. Engineered wood and fibre cement cost more initially but offer longer durability and lower long-term maintenance. Metal siding is highly protective with minimal upkeep but has a higher starting cost. The best value depends on whether you want a lower price up front or fewer repairs later on.

What Is the Best Siding for Alberta Homes?

Alberta homes, especially in Red Deer, face snow, wind, deep freezes, and fast-changing conditions. The most trusted siding materials for this region include: ● James Hardie fibre cement ● Engineered wood siding ● Metal and steel siding ● Vinyl siding Your final decision should reflect your home’s style, your budget, and how much upkeep you want to take on over the years.

How Much Is 1,000 Square Feet of Siding?

Here is a basic cost guide for siding 1,000 square feet in Red Deer: ● Vinyl Siding: $20,500 ● Cedar Siding: $10,500 ● Engineered Wood Siding: $30,500 ● Metal Siding: $10,000 ● Aluminum Siding: $30,000 These are rough figures and will vary depending on material grade, layout complexity, and labour requirements. For an exact quote, reach out to Family Siding today.

Trusted Siding Services in Red Deer

Guaranteed Quote Within 24 Hours & Free, On-Site Consultation
Flexible Financing + Limited-Time Promotions
We Beat Competitor Quotes by 5% - Transparent Pricing

Online Quote

https://familysiding.com/wp-content/uploads/2025/03/i-underroof.com-main-page-Frame-384-2.jpg

A Message from Bryan, Owner of Family Siding

Brian Davis CEO of Family Siding

Hi, I’m Bryan. After more than 30 years working in Red Deer’s siding trade, one thing has never changed: each home or building we work on has its own style, structural needs, and design priorities. At Family Siding, we install siding that’s made to endure through every season and tailored to fit the exact demands of your residential or commercial property.

Installation That Holds Up

Our team doesn’t guess, rush, or compromise: we follow the manufacturer’s specifications to the letter, delivering siding that’s properly secured, weather-ready, and built to perform for years.

Full-Service from Start to Finish

From your initial call to the final walkthrough, we stay actively involved, making sure nothing gets overlooked and no question goes unanswered, so your project moves forward without delays or confusion.

Built for Red Deer Weather

Red Deer weather is no joke: between sudden cold snaps, temperature swings, and strong prairie winds, we use materials for siding in Red Deer that are built to hold their shape, keep moisture out, and maintain performance throughout the year.

Shield Your Building Year-Round

With siding chosen specifically for Red Deer’s climate challenges, your property will be better insulated, better protected, and ready for whatever the forecast throws at it. Reach out and we’ll get you moving in the right direction.

Learn More

Brian Davis CEO of Family Siding

Our Siding Services in Red Deer

James Hardie Siding

Red Deer’s changing weather can be hard on exteriors, which is why James Hardie siding remains a top choice. Built with durable fiber cement, it holds up well against excess moisture, pests, and temperature changes. Unlike vinyl or wood, it will not crack, swell, or warp when the weather shifts. With a broad selection of finishes and colours, it brings lasting curb appeal and an extra thermal layer that helps manage indoor temperatures while cutting outside noise. At Family Siding, we install James Hardie siding exactly as recommended to ensure long-term performance. Choose interior siding that stands up to Red Deer conditions and get your free quote today.

Vinyl Siding

In Red Deer, where weather conditions shift often, vinyl siding is a reliable and low-maintenance choice. It handles wind, extreme cold, and high temperatures while requiring very little upkeep. Just a quick rinse keeps it looking clean and fresh. Available in a variety of designs and colours, vinyl siding is a fast way to refresh your exterior while also improving insulation and reducing year-round energy costs. Our trained installers follow a careful process to deliver results that last. Contact us now to request your vinyl siding estimate.

Cedar Siding

If you’re after a natural look that holds up through seasonal changes, cedar siding in Red Deer is a strong option. It naturally resists mildew and insects and handles moisture well without the need for harsh chemical treatments. Beveled cedar siding helps move water away from your structure, while channel profiles add rich texture and visual depth. Both types help balance indoor temperatures across Red Deer’s wide seasonal range. Our cedar siding workers focus on clean lines and tight fits, ensuring your home looks great and stays protected. Get in touch for your cedar siding quote.

Metal Siding

Metal siding performs exceptionally well in Red Deer, where the weather can swing fast from cold to warm. It resists cracking, bending, and warping when snow, wind, or ice hit hard. Steel siding is built to absorb impact, resist fire, and keep moisture out, all while maintaining its structure across seasons. With a variety of finishes and colours available, metal siding offers both a modern look and lower maintenance. Family Siding installs every metal panel with care to provide strong insulation and long-term protection. Call today for a no-obligation quote.

Longboard Siding

Longboard siding delivers the appearance of wood with the advantages of aluminum. It does not absorb water, fade, or wear down like natural timber, even during Red Deer’s unpredictable weather. Lightweight and easy to maintain, it comes in rich woodgrains and bold solid colours that stay vibrant over time. Longboard siding offers a clean, architectural look without constant touch-ups. Our installers ensure every detail lines up perfectly for maximum curb appeal and performance. Request your Longboard siding quote now.

LUX Siding

LUX siding offers sleek design and serious weather resistance. It stays solid during storms, cold snaps, or high winds without peeling, denting, or shifting. Choose from realistic woodgrain, metallic tones, or solid colour options to match your home’s style. LUX siding also helps reduce energy loss in colder months by creating a sealed exterior layer. Our team will install it to specifications, ensuring that this siding in Red Deer looks stylish and performs reliably. Reach out today to schedule your LUX siding consultation.

EasyTrim Siding

For modern edges and clean transitions, EasyTrim is a smart addition. Designed to pair with most panel systems, this aluminum trim resists cracking and helps seal vulnerable areas on your exterior. EasyTrim stands up to weather shifts in Red Deer while adding a finished architectural touch. Our siding contractors apply EasyTrim with exact measurements and careful fitting to maintain both appearance and function. Book your free EasyTrim quote today.

Engineered Siding

Engineered siding replicates the look of real wood while delivering greater durability. Built from composite materials, it stands up to moisture, heavy use, and Red Deer’s varying weather without losing shape or colour. For added dimension, board and batten options offer extra depth and stability. Our engineered wood siding installers use proven methods to ensure a strong fit and lasting finish. Call Family Siding now to get your no-cost engineered siding estimate.

Aluminum Siding

Aluminum siding offers lightweight strength and excellent performance in Red Deer. It resists moisture, extreme temperatures, and wear without fading or warping. The baked-on finish keeps colours bright, and the panels won’t soak up water. With styles that suit both traditional and contemporary homes, aluminum siding is a smart and budget-friendly upgrade. Our aluminum siding workers follow best practices to ensure flawless results. Contact us for your free quote.

AL13 Siding

Built from high-grade aluminum, AL 13 siding is designed to handle Red Deer’s weather. It maintains its shape, colour, and finish no matter how quickly temperatures shift. With multiple layouts and colours available, AL 13 works well for both residential and commercial spaces. It also contributes to better insulation, reducing energy costs year-round. Family Siding installs AL 13 siding carefully to ensure consistent performance and a sleek finish. Book your estimate today.

Average Cost of Siding Installation in Red Deer

Siding prices in Red Deer vary depending on the material you choose, the total surface area, any prep work required, and the complexity of the installation. While costs siding in Red Deer shift based on these factors, the breakdown below provides a general overview of what to expect with the most popular types of siding used across Red Deer. Click on any image to find out the price our siding company offers.

James Hardie Siding
Costs of James Hardie siding in Red Deer begin at $10.50 per square foot. For a home with 1,800 square feet of coverage, expect a total investment between $17,010 and $20,790. Cost varies with trim selections, labour time, and finish coatings.
Vinyl Siding
Starting at $20.50 per square foot, vinyl siding installation for an 1,800 square foot home in Red Deer generally costs between $33,210 and $40,590. Total pricing will depend on the quality of the product selected, prep work needed, and labour involved.
Cedar Siding
Cedar siding installation begins at $10.50 per square foot. For a home with 1,800 square feet of exterior coverage, you can expect to pay between $17,010 and $20,790. Variations in cost stem from the wood type, finishing options, and installation techniques used.
Engineered Wood Siding
Priced at $30.50 per square foot, engineered wood siding for an 1,800 square foot exterior typically ranges from $49,410 to $60,390. The final number will shift depending on thickness, texture, and design preferences.
Metal Siding
Metal siding installation starts at $10.00 per square foot. For a project that spans 1,800 square feet, your total cost will likely fall between $16,200 and $19,800. Factors such as panel type, coating quality, and insulation layers impact final pricing.
Aluminum Siding
Aluminum siding begins around $30.00 per square foot. Installing it on a property with 1,800 square feet of surface area typically costs between $48,600 and $59,400. Panel style, finish type, and fastener system contribute to price changes.
LUX Panel Siding
LUX siding starts at $15.50 per square foot. For homes with 1,800 square feet of exterior surface, final costs range from $25,110 to $30,690. Your selections for colour, panel layout, and decorative trim affect overall price.
Longboard Siding
Longboard siding, made from aluminum and designed for low maintenance, starts at $10.50 per square foot. For 1,800 square feet of siding, pricing typically ranges between $17,010 and $20,790. Design options, colour texture, and the fastener system will influence your total cost.
AL13 Siding
AL13 siding begins at $13.50 per square foot. On an 1,800 square foot building, installation typically ranges from $21,870 to $26,730. Dimensions, layout, and required hardware will adjust the final quote.
EasyTrim Siding
EasyTrim is priced from $135 per square foot and is at the premium end of siding options. A house siding project with 1,800 square feet will vary in cost depending on how much trim is used, panel arrangement, and method of installation.

https://familysiding.com/wp-content/uploads/2024/04/4-1-2.webp

Limited-Time Deals: Reduce Your Siding Costs in Red Deer

At Family Siding, we believe in rewarding our customers with unbeatable deals. If you're upgrading your home or planning a full siding installation, these exclusive promotions make it even easier to get the best quality at the best price.

Get Up to $1,000 Back

If you are happy with our siding company’s work, refer a friend or neighbour and earn up to $1,000 once their siding project is complete. The referral bonus applies to projects with a minimum size of 1,500 square feet. Ask us how our referral program works and start earning.

Save 10% on Projects Over 2,000 Sq. Ft.

Tackling a larger project? When your siding order covers more than 2,000 square feet, we automatically apply a 10% discount to your final invoice. It’s our way of helping you manage larger renovations without stretching your budget.

10% Off on Select Premium Siding

We’ve partnered with premium brands to bring you savings on high-end siding materials. When you purchase selected products through Family Siding, you’ll receive 10% off your materials and installation. Ask which siding styles qualify.

10% Off for Seniors and Clients with Disabilities

We value our Red Deercommunity and proudly offer a 10% discount on siding installations for seniors and individuals with disabilities. This appreciation offer helps make home improvements more accessible.

https://familysiding.com/wp-content/uploads/2024/04/bg2.png

Lowest Siding Rates in Red Deer — Guaranteed

Family Siding offers reliable house siding solutions at competitive prices. On average, our estimates are 5% lower than other siding contractors in Red Deer, without cutting corners on materials or service. If you’ve already received a quote from another company, send it to us and we’ll beat it. How to Claim Your Discount:

Download or print the written estimate you received from another siding contractor.
Fill out your name, contact info, and project details.
Send the file to our team via email or upload it through our website.

We’ll review your submission and respond with your adjusted quote within the hour. Ready to save on your siding installation in Red Deer? Contact us today and see how much we can trim from your total project cost.

https://familysiding.com/wp-content/uploads/2024/04/manMob.png

Top Siding Styles in Red Deer

In Red Deer, siding needs to do more than just look good. It must hold up against shifting weather, provide solid insulation, and stay low-maintenance over time. These three siding styles are the most requested by homeowners in the area for both their visual appeal and year-round performance. Take a closer look at each to find the right fit for your exterior.

Lap Siding

Lap siding continues to be a top choice in Red Deerdue to its overlapping board design that naturally channels water and snow away from the home’s exterior. Available in fibre cement, engineered wood, and vinyl siding options, each material brings distinct benefits. Fibre cement and engineered wood resist cracking, moisture buildup, and distortion, while vinyl siding offers an affordable, low-maintenance finish that resists fading. Lap siding not only protects the structure but also promotes better airflow and adds a thermal barrier to regulate indoor temperatures. With various sizes, textures, and finishes available, it complements everything from older heritage homes to sleek, modern builds.

Siding Panels

Panel siding features wider boards that create a clean, uniform look and works especially well for homeowners seeking modern or minimalist design. Available in fibre cement, composite materials, and metal siding panels, this style delivers exceptional strength and visual simplicity. Fibre cement panels offer resistance to fire and water, while metal siding panels perform well in areas prone to strong wind or deep cold. A key advantage of panel siding is the reduced number of seams required to cover large surfaces, which means fewer weak points and less opportunity for leaks. Many systems also include rainscreens that help manage moisture behind the panels for improved long-term performance.

Shakes and Shingles

Shakes and shingles bring depth and dimension to home exteriors, making them ideal for homeowners who want visual contrast and texture. These smaller, overlapping pieces create a layered finish that stands out next to flatter siding styles. Cedar shakes offer a natural grain, built-in insulation, and weather resistance without the need for chemical treatment. For added strength and durability, fibre cement and engineered wood versions of shakes and shingles are also available. Their overlapping layout encourages quick water runoff and makes them easier to maintain. These siding styles are especially popular on gables, dormers, and accents, where detail makes a difference.

Portfolio

- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation
- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation
- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation

Why Red Deer Homeowners Choose Family Siding

Tailored Service from Start to Finish
We begin every job by listening carefully to what you want, whether it’s a certain look, performance level, or budget. From the first conversation through to final installation, we focus on delivering siding that fits your home and your expectations.

Read more
Clear, Competitive Pricing
Our estimates typically come in 5 percent below other siding companies in Red Deer. You receive full cost transparency with no pressure and no surprises. If you already have a quote from another company, we will match the details and offer a better rate with the same or higher quality.

Read more
Reliable Materials and Skilled Installation
We work with materials that are proven to perform in Red Deer. Our team is trained to handle shifting weather conditions and follow proper methods to ensure every panel, trim, and fastener is correctly placed and secured.

Read more
Styles and Materials for Any Home
From metal siding and engineered wood to James Hardie siding and vinyl siding, we offer a full range of options to match your vision. Whether your home is traditional, modern, or somewhere in between, we have the right solution.

Read more
Helpful Advice You Can Trust
Not sure what type of siding is right for your house? We explain the differences in materials, energy savings, and long-term upkeep so you can make a decision that fits both your goals and your budget.

Read more

Our 5-Step Siding Installation Process in Red Deer

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-ac38a3a58e16795bee64d859cfce71e9.jpeg

Removing the Old Siding

Every project starts with removing the existing siding. This step gives us full visibility of the wall underneath, allowing us to identify any hidden issues and create a solid foundation for the new siding installation.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-58fc3f44cc21bc94cccfb4a6bebc4bd6.webp

Inspecting and Repairing the Surface

Once the old materials are off, we inspect the entire exterior wall for signs of damage, rot, or structural wear. If we find any problem areas, we fix them on the spot to make sure the surface is strong and ready for the next layer.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-2ed3d88720a3a9733b9a590d3d122e19.jpeg

Prepping the Exterior Walls

We prepare your home’s walls by adding insulation, applying a moisture barrier, and wrapping the structure with a protective layer. This step is essential in Red Deer, where the weather can shift quickly, and it helps your siding perform better over time.

https://familysiding.com/wp-content/uploads/2024/04/4-1-1.webp

Installing the New Siding

The installation timeline depends on your home’s size and layout, but most siding projects in Red Deertake between one and two weeks. Our crew installs each panel with exact measurements, making sure the siding is aligned and secured to prevent movement or wear from wind, cold, or snow.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-6da6b8e76c7cebffd08297b878c2a969.jpeg

Final Check and Clean-Up

After installation is complete, we do a full inspection to confirm everything is finished correctly. All debris is cleaned up, and we walk you through basic maintenance tips, warranty coverage, and how to care for your new exterior siding. At Family Siding, we handle every job with precision and accountability. Reach out today to schedule your free quote and see why homeowners across Red Deer trust us for siding done right.

The Risk
Sloppy technique results in uneven seams, visible gaps, and poorly aligned siding panels. These issues make it easier for water to seep in, which leads to faster material breakdown and costly structural damage. In many cases, siding manufacturers will void your warranty if their product is installed incorrectly.

Our Solution
Our certified siding installers follow precise installation methods for every material we use, whether it’s James Hardie siding, engineered wood, or metal siding panels. Every section is sealed properly, aligned correctly, and installed to hold strong in Red Deer’s climate.
The Risk
Siding contractors without proper certification often skip warranty registration or vanish when problems show up months later. If anything fails, you’re left paying for repairs out of pocket with no coverage.

Our Solution
We include full manufacturer warranty protection with every house siding job we complete. If you need help after installation, our team is available to assist and ensure your siding continues to perform.
The Risk
Low-quality installation can lead to poor insulation, leaks, and exterior wear that drives up your energy bills and forces frequent repairs.

Our Solution
We use siding in Red Deer built for performance and install them with care. That means stronger protection, better energy control, and results that last through every season in Red Deer. At Family Siding, we believe expert work and reliable materials are the foundation of every project. Contact us today to book a free quote and protect your home with siding installed the right way.

https://familysiding.com/wp-content/uploads/2024/05/IMG_7239.webp

See what our customers have to say!

Rating

5.0

The best siding installation company. I looked through a million Calgary siding companies, and I’m very glad that I settled on you. Communication, consultations, assistance in choosing a project and work – all at the highest level. Thank you for your professionalism, responsibility, and speed.
Rachel 07/24/2024
Price/quality at the highest level. Needed new siding for the house. We found a very cool solution that allowed us to quickly and profitably update the cladding. The work was done efficiently. Guarantees provided. I am pleased with the pleasant cooperation and the excellent result of the work.
Anthony 05/17/2024
Purely professional approach I tried to hire other contractors before but got tired of waiting. Thank you, guys, for the quick response! Moreover, they even offered a lower cost on longboard panels than previous contractors. Everything was completed faster than I expected.
Felix 11/20/2023
It was better than expected! Thank you, siding contractor Calgary Family Siding, for the professional approach to renovating my home! It looks so beautiful now. And it is very cozy inside. I’m glad I took your advice and chose the best siding for me!
Monica 08/19/2020
My wife was satisfied with them Perfect contractor who was able to find a compromise with my wife. They were so patient and courteous, thanks for that! The Hardie siding facade looks very nice, and the inside is warm (which is more important to me). We still need to remember dampness and mold.
Freddy 10/12/2019

https://familysiding.com/wp-content/uploads/2024/06/map.webp

Our Service Areas in Red Deer

We proudly serve all neighbourhoods in Red Deerand the surrounding area, so you can count on premium-quality siding installation wherever you are.

Anders Park

Aspen Ridge

Bower

Clearview Meadows

Clearview Ridge

Davenport

Deer Park

Downtown

Eastview

Fairview

Garden Heights

Glendale

Highland Green

Inglewood

Johnstone Crossing

Kentwood

Lancaster Green

Laredo

Liberty Landing

Morrisroe

Mountview

Normandeau

Oriole Park

Parkvale

Pines

Rosedale

Riverside Meadows

South Hill

Sunnybrook

Timberlands

Vanier Woods

West Park

Westlake

Bashaw

Bentley

Big Valley

Blackfalds

Bowden

Carstairs

Clive

Crossfield

Delburne

Didsbury

Drumheller

Eckville

Elnora

Erskine

Ferintosh

Gull Lake

Innisfail

Lacombe

Linden

Markerville

Mirror

Morrin

Munson

Olds

Penhold

Pine Lake

Ponoka

Rimbey

Rocky Mountain House

Springbrook

Spruce View

Stettler

Sundre

Sylvan Lake

Three Hills

Trochu

Red Deer County

Lacombe County

Ponoka County

Clearwater County

Kneehill County

Stettler County

Mountain View County

Wheatland County

Wetaskiwin County

Camrose County

About Family Siding

At Family Siding, we are committed to providing home siding solutions that stand up to Red Deer’s challenging weather year after year. With decades of hands-on experience, we work with durable materials and proven installation techniques to help protect your home while improving its appearance.

When installing siding in Red Deer our installers pay close attention to every detail, from the first measurement to the final inspection. We use siding materials designed to perform in Alberta’s climate, including James Hardie siding, vinyl siding, metal panels, and engineered wood siding. Every installation is completed with precision and backed by warranties you can trust. Our pricing typically comes in five percent lower than competing siding companies in Red Deer. We also offer flexible financing to help you stay on budget without compromising on quality or performance. Email us info@familysiding.com today to request your free quote and discover why homeowners throughout Red Deer choose Family Siding.

https://familysiding.com/wp-content/uploads/2024/05/iStock-1337068310-1.webp

Ready for a complimentary assessment or inspection?

FAQ

How Is Siding Installed?

The installation process begins by removing any existing siding to expose the structure underneath. We carefully inspect the surface for hidden damage or wear. Once the area is cleared and prepped, a moisture-resistant barrier is applied to protect your home and extend the lifespan of the new siding. We then install starter strips and corner posts to create a level base for vinyl siding, fibre cement, or engineered wood. Each panel is placed with precision and secured using the correct fasteners. The job is finished with trim and flashing to seal joints and give your exterior a clean, professional finish.
When Should You Replace Your Siding?

Old or damaged siding can create larger issues if ignored. Cracks, warping, or loose seams allow water to enter, which weakens the wall underneath and increases the risk of mold or rot. Fading, peeling, or bubbling paint can also be signs that your siding no longer protects your home. Higher energy bills may point to insulation failure behind the siding. If panels are falling off or look uneven, structural problems may be developing. These signs often mean it’s time to replace your siding. Contact us for a free inspection and honest advice.
Should You Repair or Replace Your Siding?

Whether you need repairs or a full replacement depends on the extent of the damage. Small issues like surface fading or a few cracked panels can usually be fixed. If there are signs of rot, water damage, or consistent warping across large sections, replacement is often the smarter and more cost-effective option. You should consider replacing your siding if: ● Energy bills are rising without explanation ● Moisture or mold appears inside your home ● Your siding is more than 20 years old ● Repairs are becoming frequent and expensive Our team will review your situation and help you choose the best solution based on cost, condition, and long-term results.
Is Vertical or Horizontal Siding Better?

In Red Deer, horizontal siding is more common because it installs faster, costs less, and is available in a wider range of colours and materials. It suits both traditional and modern homes. Vertical siding in Red Deer gives homes a taller, more contemporary look and adds visual interest, but it may require more time and a higher budget for proper installation. The better option depends on your home’s design, your budget, and the final look you want. We can walk you through both to find what works best.
How Much Is Vinyl Siding Per Square Foot?

For a 1,500 square foot home in Red Deer, vinyl siding starts at $20.50 per square foot. The total project cost generally falls between $30,750 and $37,725 depending on the product quality, labour needs, and any extras like trim or insulation. The shape of your home and how much prep is involved will also affect the price. Simpler installs cost less, while custom layouts or added upgrades will increase the final amount.
What Is the Best Siding for Canadian Winters?

In Red Deer, siding must hold up against freezing temperatures, snow, wind, and ice. The most reliable materials for cold climates include: ● James Hardie fibre cement for its fire resistance and stable colour ● Engineered wood for the natural look with better strength ● Metal siding for its resistance to snow and temperature swings ● Vinyl siding for affordability and energy efficiency Each material performs well, but the right choice depends on your budget, design preferences, and how much maintenance you’re willing to manage.
What Is the Most Cost-Effective Exterior Siding?

Vinyl siding is the most budget-friendly option, priced at $20.50 per square foot. It delivers reliable insulation, minimal upkeep, and solid protection in cold climates like Red Deer. Engineered wood and fibre cement cost more initially but offer longer durability and lower long-term maintenance. Metal siding is highly protective with minimal upkeep but has a higher starting cost. The best value depends on whether you want a lower price up front or fewer repairs later on.
What Is the Best Siding for Alberta Homes?

Alberta homes, especially in Red Deer, face snow, wind, deep freezes, and fast-changing conditions. The most trusted siding materials for this region include: ● James Hardie fibre cement ● Engineered wood siding ● Metal and steel siding ● Vinyl siding Your final decision should reflect your home’s style, your budget, and how much upkeep you want to take on over the years.
How Much Is 1,000 Square Feet of Siding?

Here is a basic cost guide for siding 1,000 square feet in Red Deer: ● Vinyl Siding: $20,500 ● Cedar Siding: $10,500 ● Engineered Wood Siding: $30,500 ● Metal Siding: $10,000 ● Aluminum Siding: $30,000 These are rough figures and will vary depending on material grade, layout complexity, and labour requirements. For an exact quote, reach out to Family Siding today.