The siding installation process

Installing siding in Spruce Grove is a multi-step process aimed at long-lasting protection and renovation of the exterior. Work begins with the removal of the existing cladding, which makes it possible to assess the strength of the house structure. Any signs of rotting or damage are eliminated before the specialists begin to carry out the next stages of the project. A moisture-proof protective film is then applied to protect the walls from unpredictable weather conditions in Spruce Grove. After the surface is fully prepared, starter strips and corner post are installed, especially if vinyl, engineered wood, and fiber cement are selected. Each panel is carefully leveled and secured with the appropriate equipment to ensure lasting performance. Finally, trim and flashing are installed to complete the exterior renovation and provide additional weather protection. Hiring the wrong siding installation contractor can cost the customer more than just a tidy sum. From structural damage to voiding warranties, poor installation creates long-term problems that many Spruce Grove homeowners discover too late. Family Siding has repeatedly faced the consequences of hasty or amateurish work by other contractors. That is why the company’s specialists strive to carry out all projects accurately, professionally and reliably.

When is it necessary to replace the siding in the house?

Timely siding replacement will protect your investment. If there are deformed panels, cracked surfaces, faded colors, or loose seams, it’s time to take action. In Spruce Grove, harsh winters and changeable weather can cause siding to wear out faster than expected. Rising utility bills can also be a sign that your siding is no longer providing proper insulation. The sooner you react to these warning signs, the more you can save in the long run by avoiding more serious structural damage.

Make repairs or completely replace your siding?

This usually depends on the extent of the damage. If there are individual cosmetic problems, such as fading or small surface cracks, repairs may be more appropriate. But if there is significant wear, rot, or water penetration, replacing the siding is more cost-effective. A complete replacement is also recommended if the siding is over 20 years old or if it has had to be patched repeatedly in the past. The company’s employees can assess the condition of the siding and suggest the most practical course of action.

The pros and cons of vertical and horizontal siding?

Horizontal siding remains a popular choice throughout Spruce Grove due to its classic appearance, wide availability, and generally lower cost. It is faster to install and is suitable for many traditional and modern house designs. Vertical siding, although usually more expensive and time-consuming to install, has a more modern look, giving houses height and lightness.

What does vinyl siding cost in Spruce Grove?

Vinyl siding is one of the most cost-effective options available. For an average 1,500 square foot home in Spruce Grove, the price typically starts at around $20.50 per square foot. This means a full vinyl installation may cost between $30,750 and $37,725, depending on factors like house shape, removal of old materials, and whether additional insulation is required. Custom trim, complex architectural details, or unique layouts can increase the total.

Which siding materials perform best in Spruce Grove winters?

Spruce Grove winters can be brutally cold and come with moisture-heavy snowfalls. That’s why it’s crucial to choose materials that can handle extreme weather. One of these is the James Hardie fiber cement which is known for its fire resistance and color stability. Other options include engineered wood, metal, and vinyl siding.

What type of siding offers the best value?

The most cost-effective siding balances upfront affordability with long-term durability. Vinyl is the most budget-conscious because of its low initial cost and minimal upkeep. For long-term use, engineered wood and fiber cement are suitable but still expensive. Although metal siding is expensive upfront, it offers decades of protection with little maintenance needed.

Which siding materials are best for Spruce Grove homes?

Given the region’s weather, Spruce Grove homes benefit most from products that are weather-resistant and long-lasting. James Hardie fiber cement, engineered wood cement, metal siding, and high-grade vinyl all perform well in Alberta’s climate. Your final decision should consider your style, energy efficiency goals, and maintenance needs.

How much does siding cost for 1,000 square feet?

Costs of siding vary depending on the material. In Spruce Grove, you can expect vinyl siding to be around $20,500 for 1,000 square feet. Cedar siding may come in at roughly $10,500, while engineered wood sits closer to $30,500. Metal siding can be more budget-friendly at approximately $10,000, and aluminum siding generally ranges around $30,000.

Trusted Siding Services in Spruce Grove

Guaranteed Quote Within 24 Hours & Free, On-Site Consultation
Flexible Financing + Limited-Time Promotions
We Beat Competitor Quotes by 5% - Transparent Pricing

Online Quote

https://familysiding.com/wp-content/uploads/2025/03/i-underroof.com-main-page-Frame-384-2.jpg

A Message from Bryan, Owner of Family Siding in Spruce Grove

Brian Davis Owner & CEO, Family Siding.

Hello, I’m Bryan, founder of Family Siding. After more than three decades working in Spruce Grove’s siding industry. I’ve learned that no two properties are the same. That’s why every project we take on in Spruce Grove gets a tailored approach and expert craftsmanship from day one. Quality Work You Can Rely On At Family Siding, we don’t cut corners. Our residential and commercial contractors follow strict manufacturer installation guidelines for every product, whether it’s James Hardie, vinyl, metal or engineered wood siding. Your siding isn’t just installed, it’s built to last. Full-Service from Start to Finish Whether you’re tackling a full exterior home remodel or a small house siding replacement, we’re with you the entire way. As one of the most trusted companies in Spruce Grove, we don’t hand you off to subcontractors or leave you wondering who to call. Our dedicated team manages every detail. Built for Spruce Grove Weather From freezing winds to sudden spring melts, Spruce Grove weather can be unpredictable. We only work with premium-grade materials like Hardie board, fiber cement, LUX, and steel siding, all known for their durability and resistance to the elements. Protect and Transform Your Property Whether you’re upgrading with EasyTrim siding, installing modern Longboard or AL13 siding, or refreshing your exterior with classic cement panels, our goal is the same: give you siding that strengthens, insulates and elevates the look of your home or building. If you’re ready to begin your exterior project in Spruce Grove, let’s talk. You’ll get honest advice, fair pricing, and craftsmanship that holds up in every season.

Learn More

Brian Davis Owner & CEO, Family Siding.

Exterior Siding Solutions for Spruce Grove Homes and Businesses

Fiber Cement Siding by James Hardie: Built for Endurance

James Hardie siding is a standout for both residential and commercial siding contractors in Spruce Grove. As a leading fiber cement product, it’s ideal for our weather extremes. Moisture, hail and fluctuating temperatures are no match for its strength. More than just tough, it offers the clean look of Hardie plank siding, available in many textures and colors. It also boosts energy efficiency and helps reduce exterior noise. Our certified team installs Hardie board siding to manufacturer specs, ensuring optimal performance.

Vinyl Siding: Cost-Effective and Low Maintenance

When it comes to affordability and resilience, vinyl siding remains a top choice in Spruce Grove. It’s fade resistant, withstands extreme temperatures, and is easy to maintain. A quick rinse is all it takes to keep it clean. Available in dozens of colors and profiles, vinyl enhances curb appeal fast. We offer expert vinyl siding installation, including vinyl house siding, vinyl siding panels, and siding options for vinyl exterior walls. It’s a practical choice for a low-maintenance siding solution.

Cedar Siding: Naturally Beautiful and Durable

Forthose seeking timeless character, cedar siding brings organic warmth to your exterior. It resists decay, insects, and humidity without needing harsh chemical treatments. Both beveled cedar and channel cedar siding are popular in Spruce Grove for their natural insulation and charm. We offer custom cedar siding installation that balance aesthetics with protection, ideal for heritage homes or nature-inspired designs with cedar wood siding.

Metal & Steel Siding: Industrial-Grade Strength

If durability is your top priority, metal siding including steel siding, offers unmatched weather resistance. These materials are fire-resistant, moisture-proof, and tough against wind and snow. It is perfect for both exterior home remodel projects and large-scale commercial jobs. We install ribbed metal siding, corrugated steel siding, and metal wall panels, available in a variety of finishes. Ask about our steel siding installation services today.

Longboard Siding: Aluminum That Looks Like Wood

Longboard siding is aluminum-based, designed to mimic natural woodgrain without the upkeep. Lightweight, non-combustible and highly weather-resistant, it’s perfect for Spruce Grove’s harsh conditions. Choose from longboard aluminum panels, longboard siding colors, and styles perfect for modern builds. We specialize in longboard siding installation, delivering the warmth of wood with the strength of metal.

LUX Panel Siding: Strength with Sophistication

LUX siding combines durability with refined aesthetics. The LUX cladding interlocking metal panels resist warping, denting, and fading while delivering high-end finishes in metallic, matte and woodgrain textures. LUX panel siding is a premium solution for clients wanting low-maintenance siding that doubles as a design feature. LUX panel installation also adds insulation, helping reduce heat loss in winter.

EasyTrim: Precision Finishing for Panel Systems

For clean lines and flawless edges, EasyTrim siding accessories create a refined finish. These aluminum trim systems pair well with panel siding like fiber cement or engineered wood siding. EasyTrim reveals and ez trim corners resists rust, cracking, and shifting in fluctuating weather. Whether it’s a renovation or new construction, easy trim installation ensures durability and style.

Engineered Wood Siding: The Look of Timber Without the Trouble

If you love the appearance of wood but want better performance, engineered siding is the solution. Made from composite wood, it resists moisture, cracking, and pests. Popular for board and batten siding, it’s also available in engineered lap siding and engineered panel siding styles. We offer engineered wood siding installation that delivers long-lasting protection with natural-looking results.

Aluminum Siding: Lightweight and Budget-Friendly

Aluminum siding remains a solid choice for budget-conscious homeowners who want weatherproof protection without high maintenance. It resists rust, doesn’t absorb moisture, and the baked-on finishes maintain color over time. Choose from horizontal aluminum siding, vertical aluminum siding, and aluminum siding panels in multiple textures. Our team offers fast, precise aluminum siding installation for lasting results. Whether you’re upgrading your home siding, building a new space, or planning a full exterior house renovation, Family Siding in Spruce Grove offers a full spectrum of options tailored to your needs. Get your no-cost estimate today and see why we’re one of the top-rated siding companies serving Spruce Grove.

AL 13 Aluminum Siding: Sleek and Modern

ALB siding is a go-to for sleek, commercial-grade exteriors. Made from strong aluminum panels, ALB cladding is engineered to remain intact during Spruce Grove’s freeze-thaw cycles. It won’t peel, split or deteriorate over time. Its modular system supports a wide range of ALB panels, layouts, finishes, and colors. This makes ALB architectural systems perfect for both homes and commercial properties aiming for a contemporary finish.

Siding Installation Costs in Spruce Grove

Planning an exterior home remodel or siding upgrade in Spruce Grove? Knowing the average costs can help you choose the right materials and siding contractors for the job. Pricing varies based on the type of siding, square footage, building structure, and labor complexity.

James Hardie Siding
$10.50

A top-tier option for cement board siding with resistance to weather, fire, and pests. Often chosen for upscale exterior house renovations. Starting Price: $10.50/sq. ft. Approx, for 1,800 sq. ft.: $17,010 - $20,790 Impacts: trim packages, color finish and complexity of architectural features.
Vinyl Siding
$20.50

Ideal for low-maintenance home siding with great weather resistance in Spruce Grove. Starting Price: $2O.5O/sq. ft. Approximately 1,800 sq. ft.: $33,210 - $40,590 Influencing factors: product quality, insulation backing, installers’ rates.
Cedar Siding
$10.50

A timeless choice for homes in Spruce Grove with a natural and rustic look. Excellent insulation and breathability. Starting Price: $10.50/sq. ft. Approx, for 1,800 sq. ft.: $17,010 - $20,790 Variables: cedar grade, surface texture and finish type (stain or paint).
Engineered Wood Siding
$30.50

If you love wood’s aesthetic but want added strength, engineered wood siding is ideal for both modern and traditional house designs. Starting Price: $3O.5O/sq. ft. Approx for 1,800 sq. ft.: $49,410 - $60,390 Factors: panel design, thickness, finish coat, and mounting style.
Metal & Steel Siding
$10.00

Perfect for Spruce Grove’s fluctuating climate. Often used by both residential siding contractors and commercial siding companies. Starting Price: $10.00/sq. ft. Approx, for 1,800 sq. ft.: $16,200 - $19,800 Cost impacts: steel gauge, panel style, insulation layer, rust coatings.
Aluminum Siding
$30,00

Great for cost-effective home siding with a smooth finish. Doesn’t absorb moisture and won’t warp or crack. Starting Price: $30.00/sq. ft. Approx, for 1,800 sq. ft.: $48,600 - $59,400 Adjustments: color coatings, joint systems, installation time.
LUX Siding
$15.50

A stylish upgrade for exterior cladding with minimal upkeep and bold design choices. Starting Price: $15.5O/sq.ft. Approx, for 1,800 sq. ft.: $25,110 - $30,690. Features: custom finishes, profile variations, hidden fastener systems.
Longboard Siding
$10.50

A modern architectural solution that mimics wood while offering the durability of aluminum. Starting Price: $10.50/sq. ft. Approx, for 1,800 sq. ft.: $17,010 - $20,790 Cost influences: cost style (woodgrain vs solid), mounting hardware, soffit integration
AL13 Siding
$13.50

Preferred by commercial contractors and high-end siding companies for modern builds in Spruce Groves. Starting Price: $13.5O/sq. ft. Approx, for 1,800 sq. ft.: $21,870 - $26,730 Price variables: panel sizing, edge treatment, framing compatibility
Easy-Trim Siding
$135.00

Used to finish panel-style sidings like Hardie Board, fiber cement, or cement panels with precision. Starting Price: $135.OO/sq.ft. Total Coat Varies Greatly: Based on number of transitions, corners and design layout. Looking for a Trusted Siding Contractor in Spruce Grove? Reach out to local Spruce Grove siding contractors to request detailed quotes based on your exact square footage, home type, and exterior design.

https://familysiding.com/wp-content/uploads/2024/04/4-1-2.webp

Spruce Grove Siding Specials: Upgrade Your Exterior for Less

At Family Siding, we believe in rewarding our customers with unbeatable deals. If you're upgrading your home or planning a full siding installation, these exclusive promotions make it even easier to get the best quality at the best price.

Earn Cash Back With Our Referral Bonus

Love how your project turned out? Spread the word! Get up to $1,000 cash back when your referral completes a qualifying siding installation, minimum 1,500 sq. ft. It’s perfect for neighbors, friends, or family planning a home upgrade. Ask your project manager how to register your referral and track your reward.

Big Projects, Bigger Savings

Have a larger exterior to cover? Save 10% automatically when your siding project exceeds 2,000 sq. ft. This applies to all materials, including vinyl, James Hardie siding, metal panes and more. It’s great for estate homes, multi-family units, or commercial upgrades.

Premium Siding - Now 10% Off

Looking to level up your siding game? Take 10% off select premium products including Hardie board, longboard aluminum, LUX metal cladding, and engineered wood siding. This offer is available only when ordered through Family Siding’s supplier network.

Community Appreciation Discount

We’re proud to support the Spruce Grove community. Seniors (65+) and individuals with disabilities receive a 10% discount on full-service siding installation. It applies to both residential contractor and commercial siding contractor projects.

https://familysiding.com/wp-content/uploads/2024/04/bg2.png

Best Siding Prices in Spruce Grove Guaranteed

Family Siding is known for delivering top-quality installation with better value than competing siding companies in Spruce Grove. Our quotes are on average 5% lower than comparable offers from other siding contractors. We never compromise on material durability or professional workmanship. Already received a quote? We’ll beat it, no questions asked. Want to Claim a Deal? It’s Easy

Locate the written quote from another siding contractor.
Fill out your name, property details, and project size.
Email us or upload via our contact form.
We’ll review and respond with a better offer within one business hour.

Ready to save on home siding in Spruce Grove? Whether it’s fiber cement, aluminum, or a full exterior siding replacement, now’s the perfect time to get started. Contact us today and lock in your discount while offers last.

https://familysiding.com/wp-content/uploads/2024/04/manMob.png

Popular Siding Styles in Spruce Grove for a Durable & Stylish Exterior

Choosing the right exterior siding isn’t just about aesthetics. In Spruce Grove’s shifting climate, it’s also about performance. Local homes and commercial properties benefit most from lap siding, architectural panels, and textures shakes or shingles, each bringing a different look and functional benefit.

Traditional Appeal: Horizontal Lap Siding

Still a favorite among Spruce Grove homeowners, lap siding combines timeless design with solid defense against the elements. Its layered structure naturally pushes rain, snow, and wind away from your home. Available in:

Vinyl – Low-maintenance, cost-effective, fade-resistant
Fiber cement (aka James Hardie) – Fire-resistant, durable, and moisture-proof
Engineered wood – Combines wood’s natural look with extra strength

Note: Lap siding is also known for its energy benefits. It enhances ventilation behind the panels, helping to stabilize interior temperatures. This is an asset during Spruce Grove’s cold winters and warm summers.

Modern Lines: Siding Panels for Contemporary Homes

Prefer something sleek and modern? Oversized siding panels offer bold, structured appeal with minimal seams. It’s perfect for those seeking a clean, architectural finish. Some popular panel materials include:

Metal siding – Excellent in cold snaps and windstorms
Fibre cement panels – Combines fire resistance and moisture control
Composite cladding – Great for commercial cladding with urban flair

Note: Some systems even integrate rainscreen siding technology for added airflow and moisture drainage. It’s perfect for long-term protection and building envelope efficiency.

Natural Texture: Shakes & Shingles

For those looking to add rustic charm or visual charm, shakes and shingles create a standout profile. This siding style adds rich shadows and dynamic texture, making it a go-to for Craftsman, cottage, or lakefront homes around Spruce Grove. Options include:

Cedar siding shakes – Offers natural grain, character, and insulation
Fiber cement shingles – Mimics wood while delivering superior strength
Engineered wood shakes – A beautiful blend of authenticity and durability

Note: These materials are layered to easily shed water and reduce upkeep, while maintaining a handcrafted look. Which Siding Style Is Right for You? Choosing between lap siding, panel systems, or shakes and shingles depends on your property type, desired curb appeal, and performance needs. Whether you’re updating a cozy bungalow or designing a striking new build, we offer expert guidance and full-service installation across Spruce Grove. Reach out today to get your free siding quote from a trusted Spruce Grove contractor.

Portfolio

- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation
- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation
- - We promise
    
    Constant Communication
    
    Transparency
    
    Top-Notch Installation

Why Spruce Grove Residents Trust Family Siding for Their Exterior Renovations

Personalized Service, Built Around You
Every home is unique, and so is every project. Our team of experienced siding installers takes the time to understand your specific goals, aesthetic, and budget. From consultation to completion, we deliver custom siding solutions that truly reflect your vision.

Read more
Transparent Quotes That Beat the Competition

Tired of vague pricing and last-minute add-ons? At Family Siding, our estimates are upfront and consistently 5% lower than competing siding companies in Spruce Grove, without sacrificing quality. Have a written quote already? Send it over and we’ll not only match it, we’ll beat it.

Read more
Built for the Spruce Grove Climate
Spruce Grove’s weather can be tough on homes. That’s why we use high-performance exterior materials built to withstand snow, wind, and sudden temperature drops. After our professional installation, the siding will not only look great, but will also last a long time.

Read more
Siding for any style of home

From cozy bungalows to modern buildings and country houses, we install siding that matches the architecture of your home and lifestyle. Taking into account the customer’s wishes – classic lap siding, bold AL13 panels, or the natural look of cedar shakes – we will offer options that will satisfy his taste and budget.

Read more
Skillful guidance at every step

Don’t know what to choose – Hardie board, LUX siding, or easy trim? No problems. Family Siding experts will explain the benefits, drawbacks and cost of each product in simple terms so you can make a confident decision without hesitation.

Read more
Let's talk about your House.

As the leading contractor for residential and commercial siding in Spruce Grove, we put all our skills into each project and strive to fully meet the Customer’s expectations. Contact us now for a free same-day estimate and find out why more homeowners are choosing Family Siding.

Read more

Siding installation in Spruce Grove is carried out strictly according to a pre-developed plan in 5 stages.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-ac38a3a58e16795bee64d859cfce71e9.jpeg

Carefully remove existing materials

The work begins with removing the old coating from the house, whether it is aged wood, cracked vinyl or damaged aluminum. This allows you to assess the condition of the supporting structure and identify potential problems at an early stage.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-58fc3f44cc21bc94cccfb4a6bebc4bd6.webp

Complete inspection of the outer surface of the walls

Before moving forward, a thorough analysis of the exterior structure of your home is carried out. If we find signs of damage from moisture, mold, or structural weakness, the Family Siding team will repair these areas to provide a solid foundation for the new siding.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-2ed3d88720a3a9733b9a590d3d122e19.jpeg

Weather protection and insulation

Here in Spruce Grove, where winters can be harsh and summers unpredictable, wall preparation is essential. To do this, the following is done. Thermal insulation is added to increase energy efficiency Steam and moisture barriers are installed to prevent the penetration of water. A layer of protective film is applied to protect against atmospheric influences. Such preparation ensures that the new siding of the house will perform its functions all year round, even during severe frosts or winds.

https://familysiding.com/wp-content/uploads/2024/04/4-1-1.webp

Qualified Siding installation

The company’s experienced installers get to work, precisely securing each panel, shake, or lap board. Each row is leveled, neat cutouts are made around windows and corners, and all components are secured with high-quality fittings. Most projects are completed within 7-10 business days, depending on the size of the house and the complexity of the design.

https://familysiding.com/wp-content/uploads/2024/04/i-underroof.com-james-hardie-6da6b8e76c7cebffd08297b878c2a969.jpeg

Final inspection and cleaning of the territory.

After installation, a thorough inspection is carried out. Each section is inspected to ensure the impeccable quality of the operation performed. Removal of debris, fasteners and material remains. The customer is provided with care instructions, as well as documents for warranty coverage. The company considers the work completed only after the Customer is fully satisfied with the results, and the property looks immaculate. Family Siding is proud to install long-life siding in Spruce Grove. Thanks to competitive prices, first-class materials and a team that strictly adheres to the work schedule, the exterior of the house is being upgraded smoothly and stress-free. Ready to start your siding project? Contact us to get a free, financially attractive quote from experienced siding specialists in Spruce Grove.

The Risk
Large gaps, uneven spacing between the boards, or their displacement are not just ugly. This installation allows water and ice to penetrate behind the siding. Over time, this leads to mold formation, rotting, and internal damage, which is expensive to repair. Most manufacturers will void warranties if their product is installed incorrectly.

Our Solution

Our certified installers strictly adhere to weather-tested installation guidelines. Every seam is properly sealed, and every board is fixed smoothly and securely, which ensures reliable protection of the Spruce Grove building at any time of the year.
The Risk

Some installers in Spruce Grove may offer lower prices but do not register the product or disappear after the work is completed. If defects appear several months after the completion of the work, the Customer will have to pay the bills.

Our Solution

Family Siding provides a full warranty from the manufacturer for each completed work. We handle paperwork, and if you need urgent service, our specialists are nearby: local, responsive and ready to help.
The Risk

Improper installation of siding can lead to cracks in the insulation, reduced thermal performance and heat leakage in winter. This increases energy costs and makes your home less efficient.

Our Solution
We use high-quality siding materials, carefully prepare the walls, lay a layer of insulation and carefully fix everything. This ensures that your home will be energy efficient and weather-resistant for years to come. Trust Spruce Grove’s Siding Experts Don’t risk the durability and performance of your exterior by hiring unqualified professionals. We back up our work with reliable guarantees, impeccable craftsmanship and materials that can withstand the weather conditions of Spruce Grove.

https://familysiding.com/wp-content/uploads/2024/05/IMG_7239.webp

See what our customers have to say!

Rating

5.0

The best siding installation company. I looked through a million Calgary siding companies, and I’m very glad that I settled on you. Communication, consultations, assistance in choosing a project and work – all at the highest level. Thank you for your professionalism, responsibility, and speed.
Rachel 07/24/2024
Price/quality at the highest level. Needed new siding for the house. We found a very cool solution that allowed us to quickly and profitably update the cladding. The work was done efficiently. Guarantees provided. I am pleased with the pleasant cooperation and the excellent result of the work.
Anthony 05/17/2024
Purely professional approach I tried to hire other contractors before but got tired of waiting. Thank you, guys, for the quick response! Moreover, they even offered a lower cost on longboard panels than previous contractors. Everything was completed faster than I expected.
Felix 11/20/2023
It was better than expected! Thank you, siding contractor Calgary Family Siding, for the professional approach to renovating my home! It looks so beautiful now. And it is very cozy inside. I’m glad I took your advice and chose the best siding for me!
Monica 08/19/2020
My wife was satisfied with them Perfect contractor who was able to find a compromise with my wife. They were so patient and courteous, thanks for that! The Hardie siding facade looks very nice, and the inside is warm (which is more important to me). We still need to remember dampness and mold.
Freddy 10/12/2019

https://familysiding.com/wp-content/uploads/2024/06/map.webp

Our Service Areas in Spruce Grove

Stony Plain

Acheson

Parkland Village

Rolling Meadows

Carvel

Carvel Corner

Manly Corner

Beach Corner

Crystal Meadows

Spring Lake

Golden Spike

Devon

Calmar

Woodbend

Birch Hill Park

Holborn

Brightbank

Duffield

Keephills

Genesee

Creekland

Saint Francis

Telfordville

Warburg

Thorsby

Buford

Glen Park

Sunnybrook

Weed Creek

Alsike

Lindale

Carnwood

Burtonsville

Northleigh

Tomahawk

Horen

Highvale

Sundance

Wabamun

Seba Beach

Fallis

Gainford

Magnolia

Magnolia Bridge

Lake Isle

Darwell

West Cove

Alberta Beach

Lac Ste. Anne

Gunn

Onoway

Bilby

Dawn Valley

Villeneuve

Calahoo

St. Albert

Noyes Crossing

Spruce Ridge

Spruce Village

Harvest Ridge

Graybriar

The Glens

Lake Westerra Estates

Garden Grove Estates

Meridian Meadows

About Family Siding: Reliable contractors in Spruce Grove

The Family Siding is not just an outdoor contractor, but siding specialists in Spruce Grove who guarantee the quality of work, reliable service and long-lasting results. Whether you want to enhance the attractiveness of your home or cope with the weather, we offer solutions that protect and ensure efficiency.

With many years of practical experience in installing and replacing siding, we treat every home as if it were our own. By cooperating with Family Siding, the Customer receives open communication, reasonable deadlines and impeccable quality of execution. Our materials are resistant to deformation, fading and cracking, so your home remains protected for many years to come. Estimates are typically about 5% lower than those of other contractors in Spruce Grove without cutting corners. Family Siding offers flexible payment schemes so that the customer's dream of renovating the facade of the house is realized and fits the budget. Ready to upgrade your siding in Spruce Grove? Call 877 545 5995 to receive a free commercial offer and find out that families throughout the region choose Family Siding for its reasonable pricing policy, high quality and peace of mind.

https://familysiding.com/wp-content/uploads/2024/05/iStock-1337068310-1.webp

Ready for a complimentary assessment or inspection?

FAQ

The siding installation process

Installing siding in Spruce Grove is a multi-step process aimed at long-lasting protection and renovation of the exterior. Work begins with the removal of the existing cladding, which makes it possible to assess the strength of the house structure. Any signs of rotting or damage are eliminated before the specialists begin to carry out the next stages of the project. A moisture-proof protective film is then applied to protect the walls from unpredictable weather conditions in Spruce Grove. After the surface is fully prepared, starter strips and corner post are installed, especially if vinyl, engineered wood, and fiber cement are selected. Each panel is carefully leveled and secured with the appropriate equipment to ensure lasting performance. Finally, trim and flashing are installed to complete the exterior renovation and provide additional weather protection. Hiring the wrong siding installation contractor can cost the customer more than just a tidy sum. From structural damage to voiding warranties, poor installation creates long-term problems that many Spruce Grove homeowners discover too late. Family Siding has repeatedly faced the consequences of hasty or amateurish work by other contractors. That is why the company’s specialists strive to carry out all projects accurately, professionally and reliably.
When is it necessary to replace the siding in the house?

Timely siding replacement will protect your investment. If there are deformed panels, cracked surfaces, faded colors, or loose seams, it’s time to take action. In Spruce Grove, harsh winters and changeable weather can cause siding to wear out faster than expected. Rising utility bills can also be a sign that your siding is no longer providing proper insulation. The sooner you react to these warning signs, the more you can save in the long run by avoiding more serious structural damage.
Make repairs or completely replace your siding?

This usually depends on the extent of the damage. If there are individual cosmetic problems, such as fading or small surface cracks, repairs may be more appropriate. But if there is significant wear, rot, or water penetration, replacing the siding is more cost-effective.

A complete replacement is also recommended if the siding is over 20 years old or if it has had to be patched repeatedly in the past. The company’s employees can assess the condition of the siding and suggest the most practical course of action.
The pros and cons of vertical and horizontal siding?

Horizontal siding remains a popular choice throughout Spruce Grove due to its classic appearance, wide availability, and generally lower cost. It is faster to install and is suitable for many traditional and modern house designs. Vertical siding, although usually more expensive and time-consuming to install, has a more modern look, giving houses height and lightness.
What does vinyl siding cost in Spruce Grove?

Vinyl siding is one of the most cost-effective options available. For an average 1,500 square foot home in Spruce Grove, the price typically starts at around $20.50 per square foot. This means a full vinyl installation may cost between $30,750 and $37,725, depending on factors like house shape, removal of old materials, and whether additional insulation is required. Custom trim, complex architectural details, or unique layouts can increase the total.
Which siding materials perform best in Spruce Grove winters?

Spruce Grove winters can be brutally cold and come with moisture-heavy snowfalls. That’s why it’s crucial to choose materials that can handle extreme weather. One of these is the James Hardie fiber cement which is known for its fire resistance and color stability. Other options include engineered wood, metal, and vinyl siding.
What type of siding offers the best value?

The most cost-effective siding balances upfront affordability with long-term durability. Vinyl is the most budget-conscious because of its low initial cost and minimal upkeep. For long-term use, engineered wood and fiber cement are suitable but still expensive. Although metal siding is expensive upfront, it offers decades of protection with little maintenance needed.
Which siding materials are best for Spruce Grove homes?

Given the region’s weather, Spruce Grove homes benefit most from products that are weather-resistant and long-lasting. James Hardie fiber cement, engineered wood cement, metal siding, and high-grade vinyl all perform well in Alberta’s climate. Your final decision should consider your style, energy efficiency goals, and maintenance needs.
How much does siding cost for 1,000 square feet?

Costs of siding vary depending on the material. In Spruce Grove, you can expect vinyl siding to be around $20,500 for 1,000 square feet. Cedar siding may come in at roughly $10,500, while engineered wood sits closer to $30,500. Metal siding can be more budget-friendly at approximately $10,000, and aluminum siding generally ranges around $30,000.